ASTM Standard low density Calcium silicate board for Insulation

Specifications

1) servce temperature 1000c
2) large-sized
3) light weight and high strength
4) high heat insulation
5) non-asbestos

Non-asbestos Calcium Silicate Heat Insulation Material Calcium silicate board ,is mixed with Xonotlite and renforced glass fibre with high service temp.(1050),good heat insulation, low bulk density, high strength, good durability and so on.

Product characteristics:

> good durability, can bear high temperature  within the limit of continuous heat load,

> low thermal conductivity, in the whole range are used with unmatched adiabatic performance.

> light weight, high strength. It is the highest in these hard thermal insulation products.

>better durability, use for a long time without powder.

>construction with ordinary carpenter applicability, tools can be optional cut products.

> used safety, hygiene. Excluding asbestos, sulfur, chlorine such poisonous substances.

> fear water, but after drying also can be used.

 

 

 HCS physical performance index

Items	Unit	HCS-170	HCS-220	HCS-270
Bulk density	Kg/m3	170±10%	220±10%	270±10%
Pressure strength	MPa	≥0.40	≥0.50	≥0.60
Flexural strength	MPa	≥0.30	≥0.35	≥0.40
Thermal conductive	W/m.k	≤0.048 +0.00011t	≤0.050 +0.00011t	≤0.056 +0.00011t
Temp.limit		1000	1050	1050
Linear shrinkage	%	≤1.50 (1000,3hrs)	≤1.50 (1000,3hrs)	≤1.50 (1000,3hrs)

We also supply limit 850 degree products.

 

Block Sizes and Dimensional Tolerances

Length±3mm	Width±3mm	thickness+2mm,-1.5mm
610	300,300,150	25-140
600	300	25-140
400	250	25-140
1000	500	25-140
1200	600	25-140

We also can supply special size and type.