Home > Products > PVC/TPE/TPU PP Resin, master batch > Ceramic fire resistant polyolefin materials
Ceramic fire resistant polyolefin materials
- 200 Ton / Tons per Month
- SHENZHEN
- T/T
- Wenzhou Yika 7.2KV High Voltage Fuse 63 Amp
- 3240 Epoxy Board, High-quality Insulation Material, Flexible Customization, Widely Applicable 3240 Epoxy Sheet
- Chinese Factory Electrical Insulation Brown 3025 Phenolic Bakelite Resin Cotton Cloth Fabric Laminate Board Sheet Phenolic Board
- 4x8 fiberglass sheets g10 epoxy glass fiber board g10 material
- Factory Price Bakelite Decorative HPL Press plates bakelite sheet
- Black G10 Sheet - High Quality Carbon Fiber G10 FR4 Sheets - Precision-made PCB Materials
Product Details
Place of Origin: | Jiangxi, China | Brand Name: | LONGTAI | Model Number: | any |
Type: | Insulator | Material: | Other, polyolefin materials | Application: | Other, High, medium and low voltage |
Rated Voltage: | 220v | Tensile Strength: | ≥6 MPa |
Product Description
Ceramic fire resistant polyolefin materials
Fire resistant ceramic polyolefin materials for low voltage cables
1.Type and application
Type | Product | Application |
TJY5121 | Ceramifiable POE insulation compound for low voltage cable | Flame retardant and Fire retardant low voltage cable |
THT3093 | Ceramifiable POE sheath compound for low voltage cable | Flame retardant and Fire retardant low voltage cable |
TG1101 | Ceramifiable POE oxygen-barrier compound for low voltage cable | Flame retardant and Fire retardant low voltage cable |
2. Product description
Ceramifiable, Flame retardant and Fire retardant POE compound for low voltage cable is based on POE resin, produced and pelletized by special technology with adding special modifier, flame retardant, anti-oxidant and other special additives.
3. Processing technic
The compound can be processed with conventional extruder, and the screw with a minimum 20:1
L/D and a compression ratio of 1.2~1.5 is recommended.
The following temperature profile of extruder is recommended:
Heat Zone | Zone 1 | Zone 2 | Zone 3 | Zone 4 | Head | Die |
Temperature ℃ | 150 | 160 | 170 | 170 | 175 | 175 |
Note: Compound should be dried at 70-80℃ before use, which has storage time exceeding two months.
4. Storage and transport
Packaging: 25kg/bag, Aluminum foil and PE membrane inside bag, and kraft paper outside bag.
Storage and transport: Avoiding in direct basked and weathering. The storage place should be in clean, cool, dry, and ventilated conditions.
5. Properties
Item | Uint | Standard | TJY5121 | THT3093 | TG1101 |
Typical | Typical | Typical | |||
Density | g/cm3 | -- | 1.54 | 1.54 | 1.55 |
Hardness | Shore A/D | -- | 92/40 | 94/42 | 94/40 |
Tensile Strength | ≥MPa | 6 | 8.65 | 7.5 | 8.65 |
Elongation at break | ≥% | 100 | 152 | 162 | 110 |
Thermal Aging | ℃*h |
| 100*240 | ||
Tensile Strength | ≥MPa | 6 | 9.5 | 7.3 | -- |
TS Change rate | ≤% | ±30 | +10 | -3 | -- |
Elongation at break | ≥% | 70 | 138 | 145 | -- |
EB Change rate | ≤% | ±30 | -10 | -11 | -- |
Volume Resistivity,at | ≥Ω•m | 1.0*1010 | 3.8*1014 | 3.7*1013 | 3.3*1013 |
Dielectric Strength | ≥Mv/m | 18 | 28 | 27 | 24 |
Impact Brittleness Temperature | ≤ |
| -45 | -45 | -45 |
15/30 | 0/30 | 0/30 | 0/30 | ||
Smoke Density |
|
| GB/T 8323 | ||
Flaming | ≤ | 100 | 60 | 55 | 44 |
Non flaming | ≤ | 250 | 144 | 160 | 108 |
Acidity of gases evolve | (PH)≥ | 4.3 | 6.5 | 6.2 | 6.3 |
Conductivity of gases evolved | ≤μs/mm | 10 | 1.0 | 0.5 | 0.5 |
Content of halogen acids | ≤mg/g | 5 | 0 | 0 | 0 |
Toxicity | ≤ | 2.5 | 0.3 | 0.2 | 0.6 |
environmental stress crack resistance | ≥96h | pass | pass | pass | pass |
thermal stress crack resistance | ≥96h | pass | pass | pass | pass |
Burn Properties | |||||
bending strength | ≥MPa | -- | 5.9 | 10.5 | 9.2 |
Volume Resistivity | ≥Ω•m | -- | ≥2.0*1018 | ≥2.0*1018 | ≥2.0*1018 |
Dielectric Strength | ≥Mv/m | -- | ≥40 | ≥40 | ≥40 |
ceramic retention | ≥% | -- | 80.2 | 84 | 85 |
Fire resistant ceramic polyolefin materials for medium voltage cables
2, Type and application
Type | Product | Application |
TJY5201 | Ceramifiable POE insulation compound for medium voltage cable | Flame retardant and Fire retardant medium voltage cable |
THT3254 | Ceramifiable POE sheath compound for medium voltage cable | Flame retardant and Fire retardant medium voltage cable |
TG1106 | Ceramifiable POE oxygen-barrier compound for medium voltage cable | Flame retardant and Fire retardant medium voltage cable |
2, Product description
Ceramifiable, Flame retardant and Fire retardant POE compound for medium voltage cable is based on POE resin, produced and pelletized by special technology with adding special modifier, flame retardant, anti-oxidant and other special additives.
3, Processing technic
The compound can be processed with conventional extruder, and the screw with a minimum 20:1 L/D and a compression ratio of 1.2~1.5 is recommended.
The following temperature profile of extruder is recommended:
Heat Zone | Zone 1 | Zone 2 | Zone 3 | Zone 4 | Head | Die |
Temperature ℃ | 150 | 160 | 170 | 170 | 175 | 175 |
Note: Compound should be dried at 70-80℃ before use, which has storage time exceeding two months.
4, Storage and transport
Packaging: 25kg/bag, Aluminum foil and PE membrane inside bag, and kraft paper outside bag.
Storage and transport: Avoiding in direct basked and weathering. The storage place should be in clean, cool, dry, and ventilated conditions.
5, Properties
Item |
Uint |
Standard | TJY5201 | THT3254 | TG1106 |
Typical | Typical | Typical | |||
Density | g/cm3 | -- | 1.48 | 1.46 | 1.58 |
Hardness | Shore A/D | -- | 95/52 | 95/50 | 95/52 |
Tensile Strength | ≥MPa | 6 | 12.2 | 11.7 | 10.6 |
Elongation at break | ≥% | 100 | 218 | 240 | 75 |
Thermal Aging | ℃*h |
| 100*240 | ||
Tensile Strength | ≥MPa | 6 | 13.8 | 13.0 | -- |
TS Change rate | ≤% | ±30 | +13 | +11 | -- |
Elongation at break | ≥% | 70 | 203 | 219 | -- |
EB Change rate | ≤% | ±30 | -7 | -9 | -- |
Volume Resistivity,at | ≥Ω•m | 1.0*1010 | 3.8*1014 | 2.8*1013 | 2.0*1014 |
Dielectric Strength | ≥Mv/m | 18 | 28 | 26 | 26 |
Impact Brittleness Temperature | ≤ |
| -65 | -45 | -45 |
15/30 | 0/30 | 0/30 | 0/30 | ||
Smoke Density |
|
| GB/T 8323 | ||
Flaming | ≤ | 100 | 51 | 52 | 40 |
Non flaming | ≤ | 250 | 149 | 151 | 110 |
Acidity of gases evolve | (PH)≥ | 4.3 | 6.6 | 6.4 | 6.4 |
Conductivity of gases evolved | ≤μs/mm | 10 | 1.0 | 0.5 | 0.5 |
Content of halogen acids | ≤mg/g | 5 | 0 | 0 | 0 |
Toxicity | ≤ | 2.5 | 0.3 | 0.5 | 0.6 |
environmental stress crack resistance | ≥96h | pass | pass | pass | pass |
thermal stress crack resistance | ≥96h | pass | pass | pass | pass |
Burn Properties | |||||
bending strength | ≥MPa | -- | 5.9 | 9.8 | 8.9 |
Volume Resistivity | ≥Ω•m | -- | ≥2.0*1018 | ≥2.0*1018 | ≥2.0*1018 |
Dielectric Strength | ≥Mv/m | -- | ≥40 | ≥40 | ≥40 |
ceramic retention | ≥% | -- | 80.2 | 82.9 | 79 |
Excellent safety and Eco-friendly:
Flame-retardant, no dripping, smoke toxicityto grade ZA1, namely there is no difference after three days once mice inhaled 30mins. so it will not cause secondary damage to the human body; smoke density light transmittance rate of up to 80% above; halogen free, non-toxic, non taste, no heavy metals for raw materials, exceed ROSH standards;
Economy:
Low density, low price, can replace the flexible fire resistant cables insulation and fire-resistant layer ,can solve welding problem of TIG burn insulation, the use of insulation and oxygen barrier for aluminum sheathed fire resistant cables. Process simple, cost and efficiency far superior to mica tape, ceramic composite tape and ceramic silicone rubber, the best solution for the flexible fire resistant cable and aluminum sheathed fireproof fire-resistant cable.
Application:
High, medium and low voltage wire and cable fire-resistant, flexible fireproof cable, fireproof power and control cables, mining cables, marine cables, oilfield and offshore platform fireproof cables, fireproof instrumentation cables, fireproof signals and data cables, fireproof coaxial cables, fireproof fiber optic cables, automotive wires, home improvement wires.
Contact Us
- Jiangxi Longtai New Material Co., Ltd.
- 3025 Micarta Linen Phenolic Cotton Canvas Bakelite Sheet
- Electrical insulation Epoxy Resin fiber glass tube g10 g11 fr4 epoxy fiberglass tube
- Factory hot sale laminate fr4 g10 good Quality Black High 4x8 Fiberglass Sheets plate with BOM/One-stop service
- G10 Fiberglass Sheet Knife Handle Materials 6mm g10 knife handle material
- High Quality G10 Insulated Material Epoxy Glass Fiber Laminated G10 Sheet
- China Silicone Thermal Pad Distributor for LED Lamp CPU GPU Cooling
- Wholesale Customized thermal conductive gap filler for GPU CPU Cooling
- Hot selling 7W thermal silicone Insulation Pad for gpu cpu cooling pad 0.5mmT Low thermal resistance
- 7W/mK Wholesale Customized Thermal Conductive Silicone Insulation Pad
- Thermal Silicone Insulation Pad For GPU CPU Cooling Pad Low Thermal Resistance
- High Performance Silicone Cooling Pad with Dual Self-Adhesive Films for PC Laptop RAM
- High Durability Ultra Soft Thermal Interface Materials For Automotive Electronics
- Outstanding Thermal Performance Conductive Pads for DVD-Rom Cooling
- China Wholesaler Street Lights Thermal Conductive Pad For LED Street Lamp
- High quality Impeller key Generator QFSN-330-2 for Indonesia Power Plant
- High quality Insulating sleeve (outer) Generator QFS-300-2 for Vietnam Thermal Power
- epoxy glass cloth resina epoxica fiberglass laminate fr-4 plate
- China factory FR-4 aluminum copper clad laminate sheets
- FR-4 laminate sheet Epoxy Glass G10 glass fiber sheet
- Fr4 Epoxy Glass Board For Electrical Insulation 0.2mm-60mm
- Fr4 Fiberglass Reinforced Polyester Sheet
- Professional Thermal Conductive Pad for LED TV and LED-lit Lamps
- 5.0W/mk Outstanding thermal performance silicone pads for Set top boxes
- 5.0mmT High Durability Conductive Pads for Heat Pipe Thermal Solutions
Popular Searches
Recommended Products
- 3240 Epoxy Board, High-quality Insulation Material, Flexible Customization, Widely Applicable 3240 Epoxy Sheet
- Chinese Factory Electrical Insulation Brown 3025 Phenolic Bakelite Resin Cotton Cloth Fabric Laminate Board Sheet Phenolic Board
- 4x8 fiberglass sheets g10 epoxy glass fiber board g10 material
- Factory Price Bakelite Decorative HPL Press plates bakelite sheet
- Black G10 Sheet - High Quality Carbon Fiber G10 FR4 Sheets - Precision-made PCB Materials
- 3025 Micarta Linen Phenolic Cotton Canvas Bakelite Sheet
- Electrical insulation Epoxy Resin fiber glass tube g10 g11 fr4 epoxy fiberglass tube
- Factory hot sale laminate fr4 g10 good Quality Black High 4x8 Fiberglass Sheets plate with BOM/One-stop service
- G10 Fiberglass Sheet Knife Handle Materials 6mm g10 knife handle material
- VCXO 32.768Mhz ±50ppm 1.8V SMD Voltage Controlled Crystal Oscillator VTKUPLSANF-32.768000
- VCXO 200Mhz ±50ppm 3.3V SMD Voltage Controlled Crystal Oscillator VTEMPCJANF-200.000000
- VCXO 61.44Mhz ±50ppm 3.3V SMD Voltage Controlled Crystal Oscillator VTEUPLJANF-61.440000
Find Similar Products By Category
- Electronic Components & Supplies > Electronic Accessories & Supplies > Insulation Materials & Elements
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
sales
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-