NBR spare parts rubber roller for rice mill with aluminum drum 6 inch / 10 inch roll

Chibi Zhongliang Rubber Roll Manufacture co., LTD. is one of the major industrial roller manufacturers, which is specialized in manufacturing rice hulling rubber roll and polyurethane rubber roll for three decades in China. The company has the domestic first-class production and testing equipment, unique formula process. For 30 years, the team is committed to research and develop new products , which are of high quality and get buyer praise widely.  Our products sell well all over the country and export to many countries ,such as Middle East, Southeast Asia, Europe and the United States etc.

  working principle 

Specification:

NBR spare parts rubber roller for rice mill with aluminum drum 6 inch / 10 inch roll

Advantage:

1. Reduced breakage of milled kernels.
2. High hulling efficiency.
3. By products are free from sand and silicon.
4. Brown rice kernels are not scratched, higher quantity of bran compared to under-runner disk husker.
5. Optimum efficiency for longer and smoother service life and better output. 
6. Ensure high degree of heat resistance and durability

Character:

1.Elastic stiffness, strong plasticity under the high hardness, moderate grain force, high roughness, low cardamine.
2.Good wear resistance, long using period.

3.Strong temperature performance, no climate impact, not deformation, soft, anti-tear at high-speed. 
4.Health and non-toxic, no pollution to rice and bran, clean, bright white grain of rice, pure color quality.

Attention matters:

1.    Handle carefully during the transportation.
2.    Store in dry place, away from Acid, Alkali, Salt, oil, and dirty, forbidden to put under sun for long   time.
3.    Take sands away from the paddy; keep paddy dry and cleaning when using the rollers.
4.    Two rollers should be at the same lever, the space must be equal.
5.   The paddy inputting should be keeping the balance.
6.  keep the rate of the re-hulling under the limited
7.   Don’t make the machine work for a long time, in case effect the hulling capacity.
8. The surrounding temperature is better under the 50°C.
9.    Change the fast and slow roller at a certain time.
10.  
    Packaging & Shipping

    

     

    

11.