automatic Slitting Machine suppliers for Roll forming machine for Russian

 Raw material: Steel coil grade: common carbon steel, galvanized steel or prepainted steel
Coil thickness: 2--12mm
Coil diameter: ≤ ∅2000mm
Coil width: 600mm--2000mm
Coil inner diameter: φ508, φ610, φ760
Coil weight for thick board slitting machine: ≤ 35T
Technique Parameter Data:
specification of Coil feeding rolls: φ210mm×2000mm
2 rolls feeding and 5 rolls leveling
Material of pinch rolls: down rolls 40Cr heat processment, HR55--56
Liner speed of this coil sheet slitter: 12m/min
Specification of slitting shaft: φ300mm×2000mm
Material of shaft thick board slitting machine: 40Cr hardened chrome
Round disc blade: D500×d300×T25mm
Material of blades: 6CrW2Si, HRC56--57 degrees
Slitting transmission: AC 160kw cycloidal gear decelerator with joint coupling driven
Slitting speed of coil sheet slitter: 0--30m/min adjustable
Slitting width accuracy: +/-0.03mm
Slitting piece specification: 5--7mm 10pcs, 8--10mm 6pcs 1--12mm 4pcs
Pre-separator shaft dia: φ210mm×2000mm
Leveling rolls material: 40Cr
Power of recoiling: 200KW DC motor
4recoiling speed: 0--30m/min adjustable
Recoiling controller: Euroasia controller 590
Recoiling capacity of the coil sheet slitter: ≤35T
Hydraulic control of our coil sheet slitter for thick sheet
Power: 11kw-4
Pressure: 16Mpa
Electrical operation cabinet 1set
PLC control
Total power of thick board slitting machine: 440KW

 Container packaging of the line suitable overseas shipping.

CUSTOMER VISIT 

CANTON FAIR

1 year warranty.

We can arrange our technicianto go to aboard,but all the relevant cost should in buyrs payed.

We provide technical support for whole life of our machine.

 BOTO JINBAILI FOLL FORMING MACHINE CO.,LTD specially in roll forming machine 15 years.and have many experiences.Main products are glazed tile roll forming machine,highway guardrail machine,floor deck roll forming machine,c z u purlin machine.Widely used in construction,decoration,simple huts.

OUR ADVANTAGE

High quality

Reliable 

Durable

More then 10 years experience

CETIFICATION

Q:How is this machine's service life?
A:In the normal maintenance,the service life at least 8 years.

Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,

replace the hydraulic oil every 1-2 years.

Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,if the broken parts can't repair,

we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.

if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.

we have rich experience in transport.

Q:Mr.Alan,can you make the machine according to my design or proto type? 
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.

Q:How many workers operate this machine to manufacture?
A:Only 3-6 workers.

Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel coil,color steel coil,and aluminum coil.