10A solar power timer

Specifications

1.10A Solar Charger Controller
2.12V/24V auto
3.Stable function
4.CE & ROHS

  Solar Charge Controller with timer and lighting controlled

 

This controller is designed for solar energy power dc supply system,and dc street lamps system, using special computer chip intelligent controller. A key type touch switch, complete all operations and Settings. It is with short circuit,overload and unique prevent inversed-connection protection,all protection measure such as automatic shutoff when full charging and overdischarging, recover automaticlly.detailed indicator of charging,overload,shoottrouble ect. This controller  get samples on the battery voltage, discharging current , the environment temperature and the parameters of battery through computer chips ,through the special control model calculation, realizing the control high accuracy and efficiency of  the discharge rate, storage temperature compensation which is line with the battery, and the high-efficiency charging pattern- PWM, ensure the best job in the state, extend battery life greatly. It has a variety of work mode, output model selection, satisfy customer all kinds needs.

 

Technical parameters:   

Model	CL10-20
Total rated charge current	10A-20A
Total rated load current	10A-20A
System voltage	12V 24V/12V AUTO
Overload, short circuit protection	1.25 times the rated current for 60 seconds, 1.5 times the rated current for 5 seconds overload protection actions  >3 times the rated current of short circuit protection
Empty load loss	<6mA
Charging circuit voltage drop	Not more than 0.26V
Discharge circuit voltage drop	≤0.15V
Overpressure protection	17V,X2/24V,
Operating Temperature	Industrial:-35°Cto+55°C
Enhance the charging voltage	14.6V, X2/24V(Duration:10min)(Discharge only if there have been calls)
Enhance the charging voltage	14.4V, X2/24V,(Duration:10min)
Float voltage	13.6V,  X2/24V,(Duration:Voltage down to return to action until the charge)
Charge return voltage	13.2V X2/24V
Temperature added	-5mV/°C/2V(Upgrade, direct charge, float, charge return circuit compensation)
Voltage voltage	12.0V, X2/24V
Put voltage over	11.1V( The initial discharge rate compensation amendment put voltage (load voltage),X2/24V
Overdischarged back voltage	12.6V,X2/24V
Control	Charging pulse width modulation to PWN