Middle type machine for make pellet wood/wood pellet press machine

Middle type machine for make pellet wood/wood pellet press machine

1. What is the machine used for?

A. The machine is used for making wood pellet biomass fuel which is low cost, high fuel value, clean and enviremental , old energy market like coal, oil, and nature gas is gradually replaced by biomass fuel.



B. And the raw material for wood pellet is very easy and common: tree branch, rice husk, peanut shell, raw wood, sawdust, nut shell, corn straw, wood chip, plant waste, bamboo power, grass, sunflower stalk, forestry waste and etc.


C. The materials will be fully made to be high economic value wood pellet which is a new and more important energy source.

2. What is the wood pellet biomass fuel used for?
The wood biomass fuel has a wide range of usages:
A. For people’s family life,

Healthy, high combustion efficiency and very environmental heating material for fireplace, BBQ and so on, 

B. For kinds of industry factories, companies, schools and so on, 

Biomass energy will be a new fuel used for spinning, printworks, paper industry , food, rubber, plastic, pharmaceutical factory , and be the heating material for company, hotel, school, restaurant and etc.

C. As the main fuel of industrial boiler, replacing the old energy as coal, heavy oil, natural gas, reducing the cost and protecting the environment.

D. New material for generating electricity,each 10000 tons of wood biomass energy will replace 8000 tons of standard coal, reducing SO2 emission of 160 tons, 80 tons of industrial fumes, 14400 tons of CO2 emission, and saving a lot of money .

3. Why is Wood Biomass Fuel so popular for Markets and People?
A. More heat will be made, the heart energy is 3400~4900 kilocalories/kg, and the carbonized wood biomass will be 7000~8000 kilocalories/kg.

B. More environmental, new clean energy, no SO2, P2O5, be of green, healthy, and environmental new fuel.
The main parameters of wood biomass as followed:

C. Lower cost and higher profits.
Easy to feed the fuel, reducing the labor intensity, low electricity is needed, saving the stack area, no damage for fireplace, boilers and the working place , extending the boilers a longer working life , a lot of cost will be saved.

The ash from burned wood pellet is of variety nutrients organic fertilizer for farmers, gardens and farms, and then making the profits again.

D. Bigger markets and more support from governments
As a new fuel with promising market value and practical usage for people' life, wood pellet biomass fuel has been called on and supported by many governments.

Developing the wood pellet biomass fuel will protect the environment, improve the climate and people’s life, promote the sustainable development of agriculture, and replace the oil , coal, natural gas and other old fuel.

1. Adjustable Pellet Diameter
For biomass fuel, the diameter of the end pellet can be adjusted to be 6-8mm, which is tested and scientific, if the pellet is for animal feed or fertilizer , then the diameter can be adjusted to 1-12mm according to different requirement.

Adjustable pellet diameter is easy and comfortable to meet customers' need.

2. Wide Processing Material Range.
A. Any agro-forestry waste material can be for producing: tree branch, rice husk, peanut shell, raw wood, sawdust, nut shell, corn straw, wood chip, plant waste, bamboo power, grass, sunflower stalk, forestry waste and etc.

B. Without any additives, all the materials will be made to be high tightness pellets of different diameters.

3. High Quality Wear-resistance Roller Shell.
A. The roller shell with big diameter is equipped, keeping high productivity and granulation rate, the end products are all of equal size and homogeneity.

B. High quality steel for roller shell : 50CS, 20CrMn(Hardness: HRC58-62), GCr15(Hardness:HRC56-60), or other steel according to customers’ requirement.

C. Roller of high quality wear-resistance are processed by special heat treatment, which is recommended to replace roller and die at the same time.

4. High Performance and Quality Gearbox
A. Multistage gear transmission , be made of high grade alloy steel which surface is professionally carburized and quenched , then elaborately processed by modern factory producing technology.

B. Smoothly transmission, high working efficiency, very low noise, high bearing stress , low temperature rise , long working time , made of high quality steel so that immensely increased the hardness and toughness, keeping the shell never to be cracked.

5.Strong and Stably Drive Shaft and Transmission Part

Superior quality, keeping stably and smoothly working performance .
As the important transmitting equipment, the material for drive transmission equipment is high-class alloy steel and poured.

6. High Wear Resistance and Stability Ring Die
The ring die is made of high wear-resistance alloy steel, and be designed and processed by special heat treatment.
Dies are of different diameters for option according to your requirement.

7. Easy but Effective Adjusting Bolt
Through adjusting bolt to change the gap between the roller shells for a better working performance or different producing requirement.

8. Scientific and Humanized Lubrication System and Oil Boit

This system has a direct relation to the working efficiency of the wood pellet machine, and at the same time reducing the friction between different machine parts.

9. New Design and Technology Has Been Devlopped
Our factory has strengthened the reinforcing rib for shell , increased the thickness for the casting, so we has obviously strengthened the whole machine performance and advantage, and we has bid farewell to the shell crack for a long time.

10. The Core Technology----Best Die Hole Compression Ratio and Die Structure
The best die hole structure just designed for wood pellet producing, the core technology of the best die hole compression ratio has been excogitated though lots of research and tests.

11. Standardized and Strict Producing and Management
We have been in Standardized and strict producing and management for many years, ensuring that all the machines and parts will be standardized and in compatibility.

12. CE and ISO Approved
Our machine has passed the CE and ISO certification for years, it's safe and reliable in operations.
For example, the safe electronic control system is completely in conformity with CE standard, the machine will be stopped at once just when you press the scram button.

13. Strict Quality Control and 1-Year Warranty
We provide a high standard of quality control and manufacturing. The unit comes with 1-year warranty. Small accessories will be offered for free if in the unlikely event that they failed

Warranty time 12 months, product was tested and functions properly before leaving our factory, we provide a high standard of quality control and manufacturing. 

2.Turn-Key Solutions from inquiry to customers' project starting.

3. Erection & Commissioning Service was supplied in time for customers' differernt requirements.

4. Operation Training Service for our customers by site guiding operation or videos expressage.

5. Spare Parts Supplied for all working life, wearing parts are free supplied in time by expressage.