Home > Products > Joint Tape > Polyken930 pipe wrap tape for gas line
Polyken930 pipe wrap tape for gas line
- 10 Ton / Tons per Month
- Qingdao China
- T/T Credit Card
- EPDM Installation Waterproof Gasket EPQ-18-5.2
- Heavy Duty Anchor Zinc Plated Anchor
- National standard water expansion stop BW putty type PZ product type 20*30 reinforced mesh type with grouting pipe slow expansion
- Buried steel edge rubber waterstop in bridge and tunnel construction joint deformation joint back attached rubber waterstop
- Reinforcing steel waterproof water expansion rubber water stop ring pile head threaded steel group water rubber expansion water stop rubber ring water
- High-density closed-cell foam strip of pedestal grouting strip sealing grouting strip special for prefabricated beam caulking project
Product Details
Place of Origin: | Shandong, China | Brand Name: | polyken | Model Number: | joint tape |
Product Description
Polyken930 pipe wrap tape for gas line
Description
Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines.
The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine
Structure
The specification of the tape consists of two layers, adhesive layer and film backing
Adhesive: butyl rubber
Outer layer: Special blend of stabilized polyethylene
Features
Excellent adhesion to pipe and self
Resistant to UV
Can be applied over a wide temperature range
Good conformability and consistent uniform thickness
Easily applied with no special equipment
Compatible with common pipe coatings
Excellent resistance to cathodic disbonding
Meets ASTM D 1000 Standard
Cold applied
Technical datas
Type | 15 | 20 | 25 | 30 |
Total thickness | 15mil(0.381mm) | 20mil(0.508mm) | 25mil(0.635mm) | 30mil(0.762mm) |
Backing | 8mil(0.203mm) | 12mil(0.305mm) | 13mil(0.330mm) | 10mil(0.254mm) |
Adhesive | 7mil(0.178mm) | 8mil(0.203mm) | 12mil(0.305mm) | 20mil(0.508mm) |
Elongation at Break | ³ 400% | |||
Tensile Strength | 40N/cm | 60 N/cm | 61.2 N/cm | 63 N/cm |
Yield Strength | 30N/cm | 35.5 N/cm | 42.3 N/cm | 45.5 N/cm |
Peel Adhesion to Primed Pipe | 20N/cm | 21.2 N/cm | 26.5 N/cm | 33.2 N/cm |
Dielectric Strength | 25kv/mm | 35 KV/mm | 45.8 KV/mm | 48 KV/mm |
Cathodic Disbandment | 0.24 in radius 6.4 mm | |||
Volume Resistivity | 2.5 x 1012 ohm.m | |||
Water Vapor Transmission Rate | £ 0.1gm/M2/24h | |||
Water Absorption Rate | < 0.06% | |||
Recommended Application Temperature | -5 to +600 C | |||
Max Serve Temperature | -40 to + 800 C | |||
Available Roll Size (width x length) | 2" to 9" X 100 to 800 feet | |||
Color | Black | |||
Recommended primer | 1019 or 1027 | |||
Performance | AWWA C-214,ASTM D 1000,
|
1. CNPC Test Report
2. DVGW Test Report
3. SGS Test Report
4. ISO 9001 / ISO 14001 Certification
Payment : | T/T , L/C at sight, Alipay, Western Union |
Production Lead Time : | usually 20days/40HQ after deposit payment |
usually 10-15days/20'FCL after deposit payment | |
Shipping Methods : | Ocean Freight / Air Flight/International Express |
OEM : | Accept, we can print your own brand |
MOQ : | it is depends items, usually 300 rolls to 500 rolls |
Shipping Port : | Qingdao, OR Other ports,Mainland China. |
Certificate : | ISO9001, ISO14001,SGS, CNPC, DVGW |
1. How about sample and charge?
Usually sample is free,customer take care of express charge.
But it should paid if asking for large quantity samples.
2. How can I visit your factory?
You are warmly welcome to our factory, just contact us in advance.
Our factory detail address :
No 3 Jiamei Road , Jia'xiang Industry Park, Jining City ,Shandong Province ,China
Located in Jining City, half an hour away from Jining Qufu Airport.
Two hours away from the Qufu East Railway Station.
- Jining Qiangke have more than 5 years experience in supplying anticorrosion materials.
- Our company employs more than 40workers, plant area 27000 m2 with two production lines.
- Our annual production capability is more than 3300tons anticorrosion tapes
- Currently, Qiangke Guanfang tape is already exported to America, Germany,Italy,Russia,Egypt,Korea,Philippines, Malaysia,Turkey,Saudi Arabia and 10 other countries and regions.
- Annual export volume reaches 1.8 million dollars.
- We have attained ISO9001 and ISO14001 certification, also we get long-term cooperation with CNPC.
- Our own brand Guanfang tape have passed the SGS, DVGW and CNPC test.
Facebook Link :/qiangketape
Contact Us
- Jining Qiangke Pipe Anticorrosion Materials Co., Ltd.
- Contact nameJecky Chen
- Phone86-537-6400111
- AddressJiaxiang Economic Development Zone (Jiacheng road and Chengxiang road interchange) Jining,Shandong
- Original 90*115*12mm CR35420 oil seal CR Radial shaft seals for general industrial applications CR 35420 SEAL
- High Quality 29952 Radial Shaft Seal 76.2*101.68*11.13MM 29952 Oil Seal
- NQK O-Ring Seal Nitrile Rubber 32*36*2 37*43*3 49*55*3 O-Rings
- China Brand Nitrile Rubber O-Ring Seal 4.42*9.66*2.62 NQK O-Ring
- Rubber NBR NQK TC Type Oil Seal 35*55*10mm NQK SF Oil Seal
- 5.75*6.751*0.5Inch Oil Seal CR57509 Double Lip Nitrile Rotary Shaft Seal CR57509
- 99.6*125.4*9.4mm Double Lip Seal TFL 522 Housing Seal
- 1.813*2.562*0.313 inch Double Lip Shaft Seal CR18049 Oil Seal
- CR12360 Double Lip Nitrile Rotary Shaft Seal 1.25*1.75*0.25 inch CR12360 Oil Seal
- 1.375*2.125*0.313inch Double Lip Nitrile Rotary Shaft Seal CR13650 Oil Seal
- 3.125*4.125*0.438Inch Housing Seal CR31185 CR Oil Seal
- Original CR31185 oil seal CR Radial shaft seals 31185 for general industrial applications CR31185
- 75*100*14 Iron Oil Seal for Truck
- Radial Shaft Seals 27539 CR Seals 2.75*4.003*0.375Inch
- Radial Shaft Seals Rubber Oil Seal 150X180X15 HMSA10 RG CR Seal
- TCV 40x62x7 FKM585 Oil Seal FKM Material High Temperature Oil Seal
- Good price LER125 seal LER125 Labyrinth seal LER-125 Seal Ring
- HDS1 H 597592 Radial Shaft Seals 597592 Self-Retaining Seals 225.43*225.43*15.88MM
- Made in USA 597592 HDS1 H oil seal 597592 seal 597592HDS1 original quality 597592 metal-cased CR597592
- High Temperature Resistance FKM Material Oil Seal TC130*215*15 Oil Seal
- NQK SF TC Oil Seal 70*90*10mm NBR Material Oil Seal
- High Quality PU Seal Hydraulic and Penumatic Seal PU14*22*5
- High Quality PU12*20*5 PU Seal Hydraulic and Penumatic Seal
- Hydraulic and Penumatic Seal PU12*18*6 PU Seal
Popular Searches
Recommended Products
- National standard water expansion stop BW putty type PZ product type 20*30 reinforced mesh type with grouting pipe slow expansion
- Injection Grade High Density Polyethylene Plastic Raw Virgin Granules Hdpe M80064 For Industrial Application
- High Density Polyethylene Plastic Raw Material Virgin HDPE Granules HDPE M80064 for pails and creats
- Wholesales HDPE M200056 FJ00952 F00952 B5429 P6006 M80064 HDPE HHM TR-144 Virgin hdpe Granules
- The best-selling toughened grade is resistant to bending and stress cracking HDPE particles M80064 for plastic boxes
- Hot sales cheap price HDPE M80064 reinforced grade injection grade polyethylene plastic bottle special material high toughne
- HDPE M80064 granules virgin /HDPE virgin plastic resin price hdpe raw material for cases, crates
- Injection Molding Factory Plastic Resin HDPE M80064 Recycle Material Virgin Sheet Used for Plastic Production High Quality
- Best price virgin HDPE plastic granules/M80064 High density polyethylene for Injection moulding
- More favorable prices High rigid particle injection grade resin container raw material HDPE M80064
- Plastic Resins Raw Materials Manufacturer High Density Polyethylene HDPE M80064 Injection Molding Grade for Boxes
- Factory direct HDPE raw material M80064 M200056 reinforced high rigid container polyethylene plastic particles
Find Similar Products By Category
- Rubber & Plastics > Rubber Products > Other Rubber Products
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Jecky Chen
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-