rgb led strip controller

Specifications

RGB RF Controller
1:5V, 12V, 24V
2.12V: <144W, 24V: <288W
3.433.92 Mhz

Direction for use

1. Connect the load wire at first, following by the power wire; Please ensure short circuit can not           occur between connecting wire before you turn on the power;
2. Adopt RF control,there are four buttons altogether, and every key-press function is as follows:

        Program: pattern key,lighting color will change if you press one time;

        Speed up: to speed up lighting color changing;

        Speed down: to speed up lighting color changing;

        On/off: Power switch,you could turn on/off controller in any state.

1. Standard color changes as follows:    

 

Items	Patterns	Remarks
1	Static red
2	Static green
3	Static yellow
4	Static blue
5	Static purple
6	Static cyan
7	Static white
8	Three-color jumpy changing	2(B) and 3(C) keys are available
9	Seven-color jumpy changing	2(B) and 3(C) keys are available
10	Three-color gradual changing	2(B) and 3(C) keys are available
11	Seven-color gradual changing	2(B) and 3(C) keys are available