HPL press group machine

Specifications

HPL press group
1.low energy consumption
2.flexible and easy operation
3.with touch screen

 

 

1. HPL BOARD PRODUCTINE MACHINE  , 10-25 OPENING HPL PRESS.

2. 4'X8', 4'X10', 5'X10',5'X12', 6'X8', 6'X12' HPL LINE AVAILABLE

3. 100 UNITS RUNNING IN CHINA AND OVERSEAS MARKET

4. We can achieve low energy consumption ,equally heating of hot platen and ensure high quality products by using advanced overheating pipe system.

5. Man-machine interface by touch screen

6. simple and flexible operation vacuum conveyor

7. reliable unloading machine and movable dolly.

 

1.HOT PRESS

nominal total pressure:                                   30000KN

size of hot pressing plate:                         1450×3000×70mm

layer no:                                         25 no

daylight:                                       100mm

cylinder dia. and walking distance:              dia 480mm×2500mm

no of cylinder:                                     6 PCS

working pressure:                                     28.5Mpa

heating medium:overheat water≤2.5Mpa(prepared by buyer)

cooling medium:               18⁰C water(prepared by buyer)

working level:                                     850mm

total installed horse power                         110KW

unit pressure                                       ≤90kg/cm²

empty closing time                                  ≤130 s

pushing speed of loader & unloader                     ~4.5m/min

heat energy                                       ~2.33MW

compressed air consumption                     1 MPa   1m³/min

weight of press                                  ~280T

height above ground                             7000mm

   control                           PLC+man-machine interface

   CHARACTER

1) HOT PRESS

The hot press is composed of press frame, cylinder, hot pressing plates, upper and down beam, inlet & outlet steam water system, hydraulic system, electrical control system.

Each group frame is composed of 2 pcs frame plate. In order to guarantee precision and rigidity , frame is whole piece . Each group frame is processed on large size DC boring-milling machine to guarantee same height of working surface of each group frame.

Chilled cast iron cylinder piston materials, cylinder is ZG500-270 cast steel, the main seals for special customized pieces. Each cylinder should go through a 35MPa high-pressure test. If cylinder in normal usage, the seal life of 3-5 years.

Each hot pressing plate surface go through ground finish to ensure that the hot pressing plate geometric tolerances and surface roughness (finish) requirements (accuracy up to 2 GB). Hot pressing plates adopt Multi-loop inlet and outlet heating structure, saturated overheat water heating to ensure the hot pressing plate surface temperature ≤ 3 °C, the maximum hot pressing plate temperature difference between each layer ≤ 2 °C.

This press can work in the hydraulic oil pressure to ensure 28.0MPa, it means that the press under the pressure of nominal can be used long-term . The user simply presses the start button, the press will complete the entire process automatically according to hot pressig curve set in man-machine interface.

 

2)  loader                

pushing carriage to and fro speed   ~4.5m/min

horse power     ~11kW

max load of each layer cage   2000kg

When Loader load each layer, cage rise one layer , waiting for the next layer raw board loading, followed by cycle, each layer filled up. To wait for pushing carriage to send to hot press for pressing. .

3) unloader              

unloader carriage to and fro speed   ~5.5m/min

horse power     ~11kW

max. load of each layer cage   2000kg

 

4) unloading carriage

pushing board speed   ~10m/min

horizontal to and fro moving speed   ~10m/min

horse power   3kW

5) back board conveyor I

transporting speed   ~10m/min

horse power   1.1kW

To transport working piece to back conveyor II.

6) back conveyor II

speed     ~14m/min

horse power 1.1kW

To transport working piece to back conveyor III.

7) back conveyor III

speed   ~17 m/min

horse power   1.1kW

To transport working piece to separating board conveyor .

8) separating board conveyor

speed ~20 m/min

horse power 1.1kW

Board will be unloaded by worker and and laid by worker.

9) transit roller conveyor

compressed air consumption ~0.1 m³/min

compressed air pressure 0.6MPa

Cylinder rises transition roller conveyor,transporting cushiod pad will be transported from separting conveyor to planking board conveyor manually.

1 0) planking roller conveyor

speed   ~20m/min

horse power 1.1kW

Operation worker plank raw board on this machine and after planking , to send to loading conveyor.

11) loading conveyor

speed   ~20m/min

horse power 3kW

To send each layer board to cage of loader.

12) vacuum accetabula carriage

max. working piece weight 300 kg

   carriage moving speed ≤65 m/min frequency convertor adjusting speed.

carriage horse power   2.2kW

compressed air flow ≥0.4 m³/min(0.6Mpa)

vacuum pump air-bleed speed 100m³/h(vacuum pump prepared by buyer)

motor horse power    5.5kW

   no of accetabula                     6 PCS

13) hydraulic system

horse power ~80kW

capacity of oil tank ~9m³