EPS Foam Sheet Extruder TH105/120

Specifications

EPS Foam Sheet Extruder TH105/120
1. make the PS foam sheet
2. With advanced patent technic to save po

EPS Foam  Sheet  Extruder TH105/120

uses a double- screw technology to produce fine-blocked cell-structured extruded Polystyrene foam sheet with high strength and a pearly and even surface, in a continuous roll.  In the extruding process, Butane or CNG for instead is injected at high pressure. After extruding , foaming, cooling, shaping and hauling off, it is winding to finished ps foam sheet rolls.  It has a user-friendly operating system with Inverter controlled driving, Digital Temperature control and Hydraulic screen changer. The raw material is general polystyrene granule. The product is PS foam sheet, which is a new type material with the features of shock proof, sound insulation,heat preservation ,damproof,safety,sanitation and good plasticity.it is used widely in the packing of food, fruits, daily necessities and advertisement board,etc.

 

Technical data:

parameter	Unit	Model
		TH-70/90	TH-105/120	TH-110/130
Capacity	KG/H	70-100	150-230	250-280
Sheet thickness	MM	0.8-4	1-5	1-5
Sheet width	MM	480-1080	480-1080	800-1080
Foaming rate		10-22
Cooling method		wind cooling & water cooling
Cutting method		Single and double cutting         Double cutting
Butagas pressure	MPa	1.5
Installed power	KW	120	200	220
Installation Dimension	M	3×4×25	3×4.5×30	3×4.5×32
Power supply	380V 50HZ             220V 60HZ 3 phase  380V 50HZ      3 phase  220V 60HZ