X 68 Buckle tube machine/buckling tube machine(high precision)

Specifications

Buckle tube machine
hose crimping machine DX 68
Buckling hose :6 to 51 mm
buckling force: 407 ton
max 4 layer.

X 68 Buckle tube machine/buckling tube machine/pipe crimping machine/hose crimping machie (high precision)

 

good mould made by linear cuting machine

Buckling hose range: Φ6Φ51mm

Max. buckling force: 407T DX68-A(220V)

Max. buckling force: 407T DX68-B(380V)

 

Scale accuracy: 0.02mm

Rated pressure: 31.5 MPa

Oil pump displacement: 5ml/rad (380V); 2.5ml/rad (220V)

Overall dimensions: 670(L)×490(W)×780(H)mm

Model pipe locking machine produced by our factory is applicable for the fastening and pressing processing of the high pressure rubber hose, fiber pipe and plastic pipe assemblies in the industry, agriculture and hydraulic transmission of engineering machine, and the machine has the following characteristics: having small volume, light weight, many functions, and rapid opening of die, being easy to operate and convenient for maintenance and repair and so on.

2. Main Technical Characteristics:

1. Inside Diameter of fastening the rubber hose: φ6 - φ51mm  2. Precision of Scale: 0.02 mm

3. Power: 4KW (Motor of Oil Pump)  4. Maximum Fastening and Pressing Force: 540 T

5. Rated Pressure of Pump: 30 MPa  6. Oil Pump Output: 14 L/min

7. Overall Dimension: 800 × 620 × 1300 (mm)  8. Weight: 200 Kg

china crimping machine manufacturer oringing from 1978

We are appling CE certificate, factory founded in 1978 with more than 30 years experience.

 

3. Installation and Experiment and Adjustment

1. Transportation: It is proper to use the fork-lift truck to transport the machine, and make the bottom of the machine under stress. It is not allowed to make the body of machine incline. It is strictly prohibited to move or lift the position of locking head and scale.

2. Installation: It is necessary to fix the machine horizontally on the firm foundation, and connect the machine to ground.

 

4. Operation

1. When it is the first time to use the machine, it is necessary to make the machine fasten and press without load for 20 - 30 times. The machine can be used only after every part of machine is normal by observing. If the pipe locking machine is used in winter, it is necessary to make the machine fasten and press without load for 20-30 times, in order to make the temperature of oil increase slightly.

 

5. Test Example

The fastening and pressing of Φ19 layer rubber hose (manufactured according to JB1885-77 Standard)

 

china crimping machine manufacturer oringing from 1978