Sewage Submersible Pump

Non Clog sewage submersible pumps are closed coupled compact design having a pump below the motor by which maximum liquid pumping is possible. Squirrel cage induction dry/wet motors suitable for operation at 230 volts1 Phase & 415 v 3 Phase, 50 Hz, AC Supply a precision manufactured motor is achieved utilizing a laminated sheet steel production process combined with the highest standard of quality control. The drive shaft and rotor assembly is heat treated and the stator and wiring impregnated with varnished. This ensures a 100% quality manufactured motor with stable characteristics and a high efficiency. 
     The bearing arrangements with double angular contact ball bearing with deep groove ball bearing give the best resistance to the radial and thrust load combination in a centrifugal pump. The bearings are enclosed with high temperature grease containing special Anti-corrosion additive. Non-clogging impeller design with the high efficiency, excellent performance and big passing of solid provide the best solution for drainage of effluent water. Below the motor impeller runs in a volute casing and the impellers are of sturdy construction and can be supplied in wear resistance material if the sewage contains hard solids.
            All SB sewage pumps have a standards equipment double mechanical seal or Silicon carbide which prevents motor from liquid being pumped. The seal has face made form T/C vs. TC which is fitted in separate oil chamber for long life.

RANGE :-

HP  :- UP To 200 HP

RPM:- 3000 / 1500 / 1000 RPM

SIZE:- UP To 12”

Head :- Up to 90 Mtr.

Capacity :- Up to 3000 lpm (In High speed pump),

                    Up To 15,000 lpm (In Low Speed pump)

Stage :- One

Solid Size :- Up to 100 mm

Concentration :- Up to 30%

MATERIAL OF CONSTRUCTION:-

·         Motor Body:- CI/SS,                                                                Cooling Jacket :- MS/ SS,

·         Casing:- CI/MS,                                                           Impeller :- Cast Iron / SS,

·         Shaft :- SS,                                                                      Hardware :- SS ,

·         Oil Chamber :- CI                                         Quick Out Coupling :- CI / SS                   

·         Strainer :- SS with 6 or 10 mm round holes ,                   

·         Mechanical seal :- TC/TC or Silicon Carbide , Bi Directional Twin Mechanical seal with various face combination Looking to the Application.

·         Cable :- PVC Insulated Double Sheathed Copper Conductor flexible Cable.

Various Type of material of construction is available as per application and need. Above details are for standard models.

TECHANICAL SPECIFICATION:-

·         Motor :- 2/4/6 Pole Squirrel cage sub type Induction Motor.

·         Speed:- 3000/1500/1000 RPM,                               

·         Connection :- DOL, Star Delta ,ATS

·         Temperature :- 45ºC (Also Available for higher temperature on request

·         Voltage:-  415v , 3phase , 50 Hz / 215v , 1phase , 50 Hz (up to 3.0 hp)

       60 Hz & other Voltages available on request.

·         Insulation  :- “F” Class                               

·         Protection :- IP-68.