Motor Reducer Gearing Permanent Magnetic Processing Machine of Iron Ores

flat rack or due to the customer's demand

Specifications

Motor Reducer Gearing Magnetic Processing Machine of Iron Ores
particle size< 0.6mm
separating high-magnetic
high efficiency

 

Name: Motor Reducer Gearing Magnetic Processing Machine of Iron Ores
Type:	Wet Magnetic Separator
Model Name:	CTB/CTS/CTN Series
Capacity Range:	1-220ton/hr
Usage:	Separate magnetite iron ore, hematite iron ore, iron removing etc.
Sheel Diameter range:	400-1500mm

 

Diagram of the Magnetic System

 

The magnetic system uses ferrite materials or is compounded with the rare earth magnet. The average magnetic induction of the magnetic surface is 100-600mT.

Sketch Picture Of Magnetic System

The Scope of Application

It is widely used in mineral separation, coal washing and chemical sectors for wet classifying strong magnetic mineral of size 0-6mm, and the mineral are divided into two kinds of products: magnetic and non-magnetic material. The specific susceptibility of its separating strong magnetic minerals should be no less than 3000*10-6cm/g, which belongs to this type of minerals are magnetite, magnetic pyrite etc.

 

Three Types of Tank

 

The one cylinder can be equipped with three types of tank, namely downstream launder, countercurrent launder and semi-countercurrent launder.

Advantages:

1. Simple structure
2. Large Processing Capacity
3. Convenient operation
4. Easy maintenance

Technical parameters:

 

Motor Reducer Gearing Magnetic Processing Machine of Iron Ores 

Our company, Boyun Machinery, is a high-tech enterprise specializing in manufacturing mining equipments. Main products are magnetic separator, ceramic vacuum filter, vacuum filter, magnetic vacuum filter, vibrating screen, magnetic pulley. Boyun brand machines have been exporting to America, EU, Austrilia and Africa.

Why choosing BOYUN company?

Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide 1-years warranty to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

In order to give you a responsible quotation, you can inform us the following information:

1. What’s the material you are going to deal with?

2. What’s the granularity of the material?

3. What’s the granularity of the final products are you going to achive?

4. What’s the producing capacity you are going to achieve?

Our engineers will suggest you the most suitable one for you according to your information.

If you have any other questions about our products, you may contact Eric through skype: hyrwl2006 or mobile cell: 0086 13912187643.