SGCC Steel Prepainted Galvanized Steel Coil
| Specification | ||
| Name | PPGI steel coil | PPGL steel coil |
| Standard |
GB/T-12754 JIS G 3312 EN 10169 ASTM A755 |
GB/T-12754 JIS G 3312 EN 10169 ASTM A755 |
| Grade |
CGCC TDC51D+Z |
CGCC TDC51D+AZ |
| Thickness | 0.12-1.5mm (±0.02mm) | 0.12-1.5mm (±0.02mm) |
| Width | 30-1250mm (±2mm) | |
| Length | Coil or as Customers' requirement | |
| Zinc/Aluzinc coating | Zn 40g/sm-275g/sm | Alu-zinc 40-150g/sm |
| Coil weight | 3-5tons or As your requirement | |
| Hardness | CQ/FH/As your requirement (G300-G550) | |
| Painting | prime : 5μm | prime : 5μm |
| top coating : 7--20μm | top coating : 7--20μm | |
| Back coating | 7 --15μm | 7 --15μm |
| Color | As RAL or your requirement | |
| Surface Treatment | With plastic film , Chromated, Wrinkle, Matt, Decorate, Sand surface, Highlight. | |
| Certification | ISO9001,BV,SGS, | |
| Application | Structural use ,roofing, corrugated roofing, commercial use, household appliance, industry | |
1.Each bare coil to be securely tied with two bands through the eye of coil(or not) and one circumferential.
2.The contact points of these bands on the coil edge to be protected with edge protectors.
3.Coil to be properly wrapped with water proof/resistant paper,it then to be properly and completely metal wrapped.
4.Wooden and iron pallet can be used or as your requirements.
5.And each packed coil to be properly wrapped with bands,three-six such band through the eye of coil at about equal distance,and two-four such bands securely tired around belly of coil at about equal distance.
1.15years production experience
2.Product be exported to more than 30 countries
3.2 prepainted galvanized steel production lines and 2 galvanized steel
1.What is recommendation?
Aisa:Thickness:0.18/0.19/0.21/0.240.26mm width 914/1000/1250mm,high gloss red,high gross brown,clear varnish
Afraic:Thickness 0.25/0.26/0.27/0.28/0.3/0.38/0.4/0.45mm with 762/914/1000/1220mm width,red,green,blue,white
South Afraic:Thickness 0.12/0.14/0.16/0.35/0.49mm with 914/1000/1220,red,green and blue color
2.What's the payment term?
30-50% TT in advance(based on your qty),70% balance against copy B/L in 7 workdays.
3.When will you arrange production?
In 7 workdays when we receive your advance payment.
4.When will you send B/L copy?
In 3-5 workdays after shipment date.
5.When will you send original Documents?
In 3-5 workdays when we get the balance.
6.From we pay the advance to we get the goods what other service you can provide?
A.Send photos from raw material to shipment.
B.Notice and remind you when will you get the goods.
C.Advise or solve when you meet the problem during your production.
Contact us:
E-mail:sales29 at
Telephone:15306432688
Skype:camelsteel29
Send Inquiry to This Supplier
You May Also Like
-
NM500 Base Plate With 8mm Hardfacing Stripe Pattern HRC 62 Wear-Resistant PanelUS$ 0.65 - 0.95MOQ: 100 Kilograms
-
Cut to Length Alloy 36 Steel Plate UNS K93603 Invar 36 Corrosion ResistingNegotiableMOQ: 10 Kilograms
-
12 Gauge Galvanized Steel Sheet Metal Plate Z275 60g 80g Zinc Coated Flat Galvanized Iron Sheet for Construction BuildingUS$ 500 - 545MOQ: 10 Metric Tons
-
Pu Insulated Polyurethane Sandwich Exterior Wall Panel for Cold Storage Warehouse PIR Roof and Wall PanelsNegotiableMOQ: 100 Square Meters
-
Steel Sheet & Plate & Pressure Vessel Plate,SA516 Gr55/60/65/70、SA515、SA387、EN 10028 P265GH、P355GH、13CrMo44、JIS G3115 SPVNegotiableMOQ: 5 Metric Tons
-
China Manufacturer Steel Plate ASTM A36 Q235 Q345 Q235B Hot Rolled Carbon Steel SheetUS$ 300 - 850MOQ: 5 Tons
-
Reservoir Uses Bottom-axis-driven Rotating Horizontal Steel Gate, Hydraulic Horizontal DamUS$ 789 - 800MOQ: 2 Combos
-
Sliding Guide Block Cover Oil Free Graphite Plugged Pads Slide Plates Bronze Wear Plates BOLIUS$ 9.5 - 10MOQ: 1 Piece
-
Wholesale Price Dx51D Dx52D Dx53D Dx54D Galvanized Carbon Steel Plate, Manufacturer GI Steel Coil SheetUS$ 420 - 860MOQ: 1 Ton
-
Hot Rolled 3mm 5mm 10mm Thickness AISI 304 304L 316L Stainless Steel PlateNegotiableMOQ: 100000 Tons





