5inch 6inch 8inch 10inch 12inch jack casters for mobile scaffolding system

   The locking stem scaffold casters are made to accurately brake at various positions. Swivel section is equipped with a lubrication fitting for field maintenance. Legs are made from 1/4-Inch steel and are welded to the outer race both inside and out for added strength. The brake support brackets are an integral part of the leg stamping, not welded on. This ensures accurate brake lever positioning and provides a sturdier brake support structure. Stepping on the brake handle simultaneously locks the wheel and swivel assembly. The swivel lock portion uses serrations in the brake lever and top plate to ensure a positive lock.

    This wheel is very heavy duty.   The steel body is not quite as beefy as the more expensive one below but it’s plenty of wheel for 95% of all applications.  Works very nicely in highly demanding rental operations.   It loads to 8100 lbs in load tests which actually higher than the below wheel……

      The stem on our caster this caster wheel is 1 3/8th" outer diameter with a 4-inch length. It has a double safety margin built into the load rating. Our wheel is Heavy Duty, load tested to handle 500 lbs with a 8-to-1 safety margin.

     The scaffold caster wheel is an 8" cast-iron wheel with a rubber overlay that is 2 inches wide and over an inch of rubber covering the iron caster wheel. There are ball bearings in the pivot mechanism to handle high loading. Double zirk grease fittings. Double lock to maintain rock solidness.   Locks to prevent wheel pivot and locks to prevent the scaffold caster wheel from rolling.  Upper steel body is galvanized.

PU/PVC/Rubber scafflding casters

1.the height of the screw jack is 400mm or others

2.the diameter of the tyre is 150mm, 200mm, and so on.

3.the material of the tyre is PE, PU, PVC, PP, Rubber with cast iron wheel core

4.we can also make as you tailored

lor: as your request

6. load capacity:250-350kg

FAQ:

Q: Are you a factory or trading company?
A: Professional Factory

Q: Where is your factory located? How can I visit there?
A: Dynastmetal is located in Wuxi City, Jiangsu Province, it is about 100km far from Shanghai.
You can come to visit us by bullet train, car or plane. You are welcome to visit us!

Q: Do you accept OEM?
A: OEM is acceptable.

Q: Can I get some samples?
A: We are honored to offer you limited free samples.

Q: What Payment terms do us accept?
A: T/T in advance (100%, 30%+70% against B/L), PayPal, Western Union, L/C, Aliexpress.

Q: How does your factory do regarding quality control?
A: Quality is the soul of a company. Dynast metal always attach great importance to quality controlling from the very beginning to the end.

Our Services

1. Online fast professional technical advice
2. Best quality products
3. Best after-sales Service
4. Complaint Service
5. OEM produce, if none of our products meet your requirement, pls contact us for customizing.

Contact us:

Andrew Zhou
Wuxi Dynast Metal Product Co., Ltd
WhatsAPP:+8613584194141
Wechat:+8613584194141
Cell: +8613584194141
QQ:381994954

E-mail: andrewzhou AT
https://dynastmetal.en.china.cn/
Address:Xinfeng Industrial Park, #10-1, Xiahe Road,Hudai Town, Binhu District,Wuxi, Jiangsu,China