Magnetic Bar for Remove Ferrous Particles

Specifications

Magnetic bar
1.Widely used to filter ferrous metal
2.Fine polished, seam-welded, liquid tight construction

1. Application:
Magnetic filter bar mainly uses in cleaning powdered, grainy magnetic substance in liquid or paste. Widely use in ceramics,electricity, minging, plastic, chemical,rubber, pharmacy,food, environmental protection, pigment, dyestuff,Electronic and metallurgy etc.

2. Operating Principle:
Magnetic bar is made by special production method and superior materials stainless steel pipes and High class B level rare earth NdFeb,the magnetic bar can combinate in a fixing bracket making like a Magnetic filter. When magnetic matters go through, they will be adsorbed firmly in the bar body by the magnetic attract so to keep products and equipments in well condition and safe.

3. Characteristic:
Non- energy consumption, non-pollution, it can easily fix in any place to have space saving in production lines touching with materials. Rare earth NdFeb is its magnetic source, powerful, simple and durable. We can also do according to customer’s requirement and real production condition to make any change freely.

4. Operation:
(Surface material: stainless steel SUS304 or SUS316L)

 

Magnetic bar	Surf. Magnetic(GS)	Dia. (mm)	Length(mm)	Temperature resistance	M Hole
FB	12000	Φ25	200	N	M8×20

 

5. Note:
(FB 12000GS 25×200 N M8×20-1)
12000GS means the magnetic force reqeust. 12000GS means magnetic bar surface magnetic force 12000GS. See below the relationship between surface magnetic and outer diameter.
25x200 25 means the magnetic outer dia.25mm;200means the total length 200mm. See below the relationship between the outer diameter and surface magnetic force.
N means Temperature resistance. There are 6 types, 

a) N: under 80℃  b) M: under 100℃  c) H:under 120℃  d) SH:under 150℃  e) UH:under 180℃  f) EH: under 200℃ (Below are the highest Temperature for each specification.

M8×20-1:M hole has three types.

a) M8×20 means both two sides have M8 hole . Screw thread length 20mm;  b) -1 in M8×20-1 means M8 hole only in one side, another side is flat. -2 means Both two sides have M8 hole.  c) No marks means no M hole in both sides.

Screw thread hole: M6, M8, M10 etc.

6. Specification and delivery terms:
Length and specification can be modified freely according to customer’s request.
For Φ6~Φ32mm bar with Temperature resistance N andΦ25 bar with Temperature M, of all kinds of length with quantity less than 200pcs will finish within 3 working days.Within 500pcs will be in one week, for other unusual products will be within 3weeks.

	4000GS	5000GS	6000GS	7000GS	8000GS	10000GS	11000GS	12000GS
Φ6(0.24")	√UH	-	-	-	-	-	-	-
Φ8(0.31")	√UH	-	-	-	-	-	-	-
Φ9(0.35")	√UH	-	-	-	-	-	-	-
Φ10(0.39")	√UH	-	-	-	-	-	-	-
Φ12(0.47")	√UH	√UH	-	-	-	-	-	-
Φ16(0.63")	√UH	√UH	√UH	-	-	-	-	-
Φ19(0.75")	√UH	√UH	√UH	√UH	-	-	-	-
Φ20.3(0.80")	√UH	√UH	√UH	√UH	-	-	-	-
Φ22(0.85")	√UH	√UH	√UH	√UH	√UH	-	-	-
Φ25(1.00")	√UH	√UH	√UH	√UH	√UH	√UH	√N	√N
Φ32(1.25")	√UH	√UH	√UH	√UH	√UH	√UH	√N	√N
Φ38(1.50")	√UH	√UH	√UH	√UH	√UH	√UH	√N	√N
Φ50(1.75")	√UH	√UH	√UH	√UH	√UH	√UH	√N	√N
Φ63(2.48")	√UH	√UH	√UH	√UH	√UH	√UH	√N	√N