Contact Platform Support
Help CenterWater Base Sealing Adhesive
Related Products
Specifications
The product is characterized by excellent performance, quick drying speed and long open time. It can withstand low and high temp
7894
Huacheng High-tech is specialized in water base sealing adhesive which is one of the largest specialized producers of water base sealing adhesive.
1. Technical indexes:
Product Characteristics |
Oil sealing effect of adhesive bonding, it can be used bonding plastic and plastic of bag’s bottom.Kraft paper bag also has a very good bonding effect. |
|
Application
|
Non-laminating, laminating, hand seal, mechanical seal can be |
Appearance |
White sticky liquid |
Viscosity |
≥10000cpa.s(25°C) |
PH value |
5--8 |
Peeling strength |
Above the strength of paper |
Packing |
20KG plastic barrel |
Storage |
Six months at 0-40 °C |
2. Applying process and precautions:
1. Please don’t add in water or any other substances and don’t mix the product with any other glue
2. The coating thickness shall be appropriate. Too thin a thickness cannot work normally.
3. Please press tight after manually sealing. If it is required to be left for
drying, the sealing shall be pressed no later than the adhesive remains still wet and is not completely dry. For mechanical sealing, as per the speed of box pasting machine, it is necessary to check the pressing and solidifying conditions after the pressing roll. In case of any opening, please adjust the machine speed or press down the opening or replace with products of higher drying speed.
4. Check the adhesion condition 24 hours after box pasting. If the body destruction of paper is achieved, the quality will remain unchanged for a long time. If the body destruction of paper is not achieved, please check whether the operation process is appropriate or whether the adhesive is suitable to check for failure to meet the paper's ontology in order to continue to use it.
5. The sealing product of polishing boxes is required to text the stability between varnish and printed matter so that the part of sealing can't break. If the varnish and printing surface breaks, bonding will be failure.
6. It is necessary to make pilot test under equivalent conditions before batch production. As was put into mass production without proofing test, status as a result of company has nothing to do with our company.
1607
Huacheng High-tech is specialized in water base sealing adhesive which is one of the largest specialized producers of water base sealing adhesive.
1. Characteristics:
The product is characterized by excellent performance, quick drying speed and long open time. It can withstand low and high temperature and can be applied both mechanically and manually.
2. Technical indexes:
Appearance |
Yellowish white liquid |
Viscosity |
≥10000cpa.s(25°C) |
PH value |
5--7 |
Solid content |
≥45% |
Peeling strength |
Above the strength of paper |
Validity period |
6 months at 0°C—40°C |
Packing |
25KG plastic barrel |
3. Applying process and precautions:
1. Please don’t add in water or any other substances and don’t mix the product with any other glue.
2. The coating thickness shall be appropriate. Too thin a thickness cannot work normally.
3. Please press tight after manually sealing. If it is required to be left for drying, the sealing shall be pressed no later than the adhesive remains still wet and is not completely dry. For mechanical sealing, as per the speed of box pasting machine, it is necessary to check the pressing and solidifying conditions after the pressing roll. In case of any opening, please adjust the machine speed or press down the opening or replace with products of higher drying speed.
4. Check the adhesion condition 24 hours after box pasting. If the body destruction of paper is achieved, the quality will remain unchanged for a long time. If the body destruction of paper is not achieved, please check whether the operation process is appropriate or whether the adhesive is suitable to the current operation process.
5. The sealing product of polishing boxes is required to text the stability between varnish and printed matter so that the part of sealing can't break. If the varnish and printing surface breaks, bonding will be failure.
6,It is necessary to make pilot test under equivalent conditions before batch production.
Send Inquiry to This Supplier
You May Also Like
-
Silicone & ProductsNegotiableMOQ: 2400 Kilograms -
Factory Price TPU Resin TPU Granules KG Thermoplastic Polyurethane Powder for Sports Shoe Sole/Cable/Phone Case TPU PelletsUS$ 2.22MOQ: 1 Kilogram
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
