Electric Hoist With CD/MD/HC/HM Type
Specifications
1.electric hoist with CD, MD, HC, HM type2.Capacity: 8-63t
3.Lifting height:6-40M
4.Monorail travelling hoit
HC model electric wire rope hoist Lifting capacity: 8-63 tons Lifting height: 6- 40m Specification same with CD1/MD1 hoist.
HC model electric wire rope hoist
Lifting capacity: 8-63 tons
Lifting height: 6- 40m
Specification same with HC hoist.
Brief Introduction:
Which is a light and small crane machinery, which can be fixed on single or double girder, bridge crane, portal crane and hanger crane. It is often used in factories, mines, docks, ports, storage houses, workshops etc., which is the necessary machinery to raise labor productivity and improve working conditions.
The lifting speed of HC type is general speed, it can satisfy the
Requirent of general use; The lifting speed of HC type has two lifting
Speed- general speed and slow speed. When worked in slow speed, it can satisfy the requirement of precision loading and unloading, examine and repaire machine tool etc precision work. Therefore, the useful scope of MD1 is wider than CD1 type.
To satisfy the requirement fo heavy duty hoists work, our factory still
Produce NH20T, HDG Type heavy duty, Anti-explosion etc all kinds special use hoists.
Motor: Hoist Motor is a taper type rotor motor with braking, it is made by Henan special motor factory, it is of the best quality motors, it has bigger torque, Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings,
Wire Rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the Drum does not slip sideways when slack.
Electric apparatus controlling system:Model CD1 and MD1 is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V,36V or 24V(safety voltage).
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even
Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting.
Specifications
Capacity :0.25T - 63T
Lifting Height :3m-45m
as your requests to modify hoist,such as voltage,running speed ,lifting speed,etc
Reducer: Third-class dead axel helica gear transmission structure is adopted,; gear and gear axel are made of heat treated alloy steel;case and case cover with precise assembly and good seal are made of quality cast iron.The reducer is independent, so its easy to load and unload it.
Control Box: It has device with up an down stroke protection of break off limiter and can cut off main circuit in an emergency,which ensures safe operation of electric block.Electric elements are of long service life and operational safety.
Steel Wire Rope "It uses GB1102-74(6*37+1) hoist steel wire rope which is durable in use.
Conical Motor : The hoist motor uses conical motors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester. The motor s load duration factor is 25%; the motor uses B frade and F grade insulation and its grade of protection isIP44/IP54.
Button Switch: Its hand-operated, easy to handle,and has two modes of cord operation and cordless remote control
Hooks: Load hooks are heat treated and fracture resistant. In case of dangerous overloading or abuse, the hook does not fracture but will slowly yield.
Power: Operating voltage 220-440V, 50/60Hz, 1-3 phase. Low voltage control 36V is standard.
High efficient energy-saving motor, asbestos free brake system. 2-speed motor available.
Sturdy pole change motors with cylindrical rotors and integrated safety brakes.
Limit Switch : Limit switch devices fitted at both top & bottom ends, switch off power automatically to prevent load chain from running out.
Pushbutton Swith : Pushbutton swith is rain-proof plastic for severe impact and corrosive atmosphere resistance and mechanically interlocked.
Hoisting Gear: Ligh tweight gear units with silent running flat bevelled gears deliver the torque required
Send Inquiry to This Supplier
You May Also Like
-
Geared Beam Trolley, Manual Geared TrolleyUS$ 22 - 380MOQ: 20 Sets
-
Non Sparking Chain Hoist,non Sparking Crane,safety Manual Monorail Hoist,crab,freight ElevatorUS$ 697 - 1,300MOQ: 1 Piece
-
Electric Swing Stage Lifting Equipment HoistUS$ 1 - 1,000MOQ: 1 Set
-
LFM-A Manual Chain HoistNegotiableMOQ: 1
-
TH Type Chain Bucket Elevator TH Hoist MachineUS$ 1,000 - 20,000MOQ: 1 Set
-
Mini Lever HoistNegotiableMOQ: 500 Sets
-
2T Light Duty Single Gear With 2 Hooks Hand PullerUS$ 1 - 10MOQ: 500 Pieces
-
Windlass for VesselUS$ 5,500 - 25,000MOQ: 10 Sets
-
Electric Hoist ModelUS$ 35,000 - 100,000MOQ: 1 Set
-
CE Approved Winch HoistNegotiableMOQ: 100 Sets