water base vacuum forming adhesive for PC desk door

YZ- Water base pvc glue of  vacuum forming                     

Product  introduce :

Water base pvc glue of vacuum forming is suitable for PVC film and abnormity of fiber board, high density board, MDF, particle board, board to wait between vacuum blister process.Vacuum blister technology is mainly used in computer, cabinets, door,speakers board and furniture manufacturing.

Advantages of features:

1, Tis product belongs to high water-base adhesives, non-toxic non-combustible, green environmental protection;
2 Have strong adhesion and end viscous force,
3, High solid content, large coating area
4, Good heat resistance;
5, According <GB18583 "interior decoration material adhesives >standard.

Ingredients:

   Waterborne acrylic emulsion, excluding GB18583 (interior decoration decorates material harmful material) in the adhesive of harmful substances, total volatile organic  content is less than 50 g/L.

Method of use:

1, clean, dry the surface before gluing .
2, machine nozzle or ordinary spray gun glue evenly onto the fiberboard;
3, wait for a certain time (after about 10 to 30 minutes), sub transparent vacuum suction plastic blister on the process.Flow operation can be performed.
4, vacuum blister process, will be strongly bonded to the PVC membrane fiberboard, tear film after cooling, plate damage.
6, glue solidified completely after 24 hours.

Tectnology data:

The health and safety:
This product does not contain organic solvent, is a non-dangerous goods, non-toxic non-combustible.During storage, transportation and use to prevent frost.

RFQ

Q1:What ‘s your product range?

1,Contact adhesive

2.PVA white glue

3.Silicone sealant

4.No more nail

5.Electronic white glue

Q2: Are you a manufacture?

Yes,we have beening in providing professional solutions on adhesive industry 20 years from 1995.

Q3: Do you have stock products to sell?

No,we work on ODM or OEM orders. That’s means size, material, quantily, design, packaging, solution ,etc will depend on your requests.

Q4:What information should I let you know if I want to get a quotation?

1,The size of packing.

2,The material & component data.

3,The quantity.

4,The certificate you need.

5.If it is prossible , please also provide with picure or design for checking. Sample will be best for charifying.If not ,we will recommend relevant products with detail for reference.

Q5:How many days will samples be finished? And how about the lead time of production?

Grenerally,3-5 days for samples making.The lead time of mass production will depand on quantity, production art etc.10-15 working days for 10 Tons.