Geophysical Surveying Electronic Soil Resistivity And IP Instrument

By utilizing relevant parameters of apparent resistivity and induced polarization method,the instrument is widely used in many aspects including metal and non-metal mineral resources exploration,energy exploration,city geophysical exploration,railway and bridge engineering exploration,etc.

Search for groundwater,search for geothermal and other hydrological,engineering geological exploration.

With 60-channel & 120-channel multiplex electrode switch made by our factory,this instrument can also be used as multi-electrode resistivity survey system.

Small,light,the instrument integrates receiver and transmitter together in the same cabinet, which can be used for measurement via apparent resistivity method and induced polarization method.

Various Measurement Parameter: Instrument can be applied in direct measurement and indication of primary potential Vp, spontaneous potential Vsp, power supply current I, apparent resistivity Ro, apparent polarizability Ms, half-decay time Th, degree of decay D, integrated IP parameters Zp, and degree of deviation R.

Measuring voltage range: -6000mV~+6000mV  Measuring voltage resolution: 0.01mV

Measuring voltage accuracy: (at Vp>10mV)±5%, ±1 digit; (at Vp>10mV)±1%, ±1 digit

Measured apparent polarizability accuracy: ±1%, ±1 digit

Measuring current range: 0~5000mA          Measuring current resolution: 0.01mA

Measuring current accuracy: (at Ip>10mA)±5%, ±1 digit; (at Ip>10mA)±1%, ±1 digit

Input impedance: >50M ohm

Interference suppression on 50Hz power frequency: better than 80dB

Maximum power supply voltage: 900V         Maximum power supply current: 5A

Power pulse width: 1-6 seconds, duty cycle 1:1

Working temperature: -10C Celcius ~ +50C Celcius, 95Rh

Weight: 8 kg

Volume: 305*200*202mm

Use aluminium case for the  metal finder , and use wooden case to pack all accessories and the equipment.

Dimension: 1030*810*620mm

Weight: 110KG

 Any question please feel free to conatct: