mini beer brewery equipment with 500l beer brewing brewhouse

1. Adopt high quality stainless steel 304 plate material, thickness: 2-3mm or thicker if you need.

2. Mirror polishing and wiredrawing two kinds of surface treatment technology.

3. All welding is argon gas protection and double-sided welding. 

4. Insulation material: polyurethane or rock wool.

5. CIP cleaning device: material SS 304; comprehensive cleaning.

6. Foundation bolt: can adjust the height of the equipment, easy to install.

7.  Using simens PLC control system can get the required standards of free switch from automatic to manual.

8. The brewer can also brew draft beer, pale beer, brown beer, stout beer etc,

 to meet different taste and level of customers.

9. We have the capacity of 50L, 100L, 200L, 300L, 500L, 1000L, 2000L, 3000L, etc per day.

  It can be customized, such as the capacity, material, voltage, heating source, etc

Beer brewery equipment production power and Equipment covers an area of analysis:

 mini beer brewery equipment with 500l beer brewing brewhouse 

1)    Crushing  and saccharification

Grind the malt to powder, make the wort after mashing transported to the filter pan by a pipeline

2)    Filter:

Send the wort after mashing boiled to wine tank filtration, separate the wort and spent grains

3)    Boil and add hops

Transferred to cooking wine cooking water tank with 100 degrees about 70 minutes, After adding hops, cooking the wort to the remaining 1000L till then along the pipeline transported to the fermentation room Cooling

4)    Cooling

The wort’s temperature is lowered to 10-12 C by cooler, then go into the fermentation tanks to ferment.

5)    Fermentation:

After adequate cooled wort into the fermenter, adding 10 - 15L of yeast for fermentation, takes about six days left to complete the fermentation, in this step will be the final malt in the sugar into alcohol by yeast (yeast Jiamai juice = Beer )

6)    Slaking and storage:

 Mature in the beer store as the necessary steps before ripening, beer maturation takes about three weeks of storage at 0 ° C for cask beer color, unique flavor development in this step will be the formation 

Beer brewhouse unit :

1) Two mashing tanks : Mash tun/Lauter pot and Kettle/Whirlpool tank (Standard Configuration) Combined mashing tanks and three mashing tanks can be chose.

2) Power Controller : Control and show the temperature and time for the tanks.

3) Wort heat exchanger, yeast adding tank and oxygen filling device, hops adding device, etc.

4) Steam condensing device inside of the room (Heating method can be customized)

5) The raw materials for China, pipeline & valves with German standard;

The motors adopts ABB/Siemens brand , it is more convenient for the customer during operation.

1)      SL-Tank has cone angle between the bottom 60-90 degrees, 70 degrees is best conducive to yeast sedimentation and emissions.

2)      SL-Tank has a cooling jacket or coil pipe to meet the cooling requirements of the process.

3)      SL-Conical tank is closed tank, the carbon dioxide can be recovered, the carbon dioxide can also be washed; the fermentation tank can also be as storage tanks.

4)      In order to reduce the cost to build, and more conical fermenter set in the open air, so there is good fermentation tank insulation. Polyurethane insulation materials commonly used in insulation layer thickness of 70-100cm.

pressure tanks with a dished bottom and tank lid

• working pressure in tank: 0/+1 bar, option 0/+2,5 bar
• made of stainless steel
• with laser welded cooling jacket (pillow plate)
• equipped with a CIP (clean in place) tube and a cleaning head
• the materials used and the surface finishing depend on the intended application and the customer's specifications
• insulated tanks make work more efficient and contribute to a more economical use of energy
• The tanks LT are available in two designs:
• tank without insulation - model LTX
• tank with insulation - model LTI

100L beer equipment:

The 100L beer brewery equipment is suitable for home brewing, small restaurant, dinning room, people can use the 100L mash lauter tun and the boiling kettle, mixing the barley wort by manual arms or by the motor rake, very easy to operate and waste lot of space in brewing.
The investment of the 100L beer brewery equipment is small amount, we will supply training and teaching if necessary.

200L beer brewery equipment:

The 200L beer equipment is defined as the small capacity brewery,it is very very popular for the school teaching or the barbecue restaurant and the cafe, brew pubs, hotel.
The brewhouse system are constituted with mash lauter tun, boiling kettle, hot liquid tanks.
The fermentation tanks should matched with 200L, or the 400L conical tanks.

300L beer equipment:

300L tanks is suitable for the medium scale restaurant, hotel etc, which can brewing beer for the clients in timely and in fresh supply.
There can be 300L fermentation tanks in 12 numbers, or you can prepare 600L conical ferment tanks in 6 numbers.
After we getting the wort and reduce the temperature then you can add different material at the fermentation tanks, then we can enjoy different taste of the beer style.

500L(5BBL):

The 5BBL beer brewery tanks can be heated by electric, steam or the direct fire. Depending on the buyer's situation.
The 5BBL beer brewery system can be used as a small beer factory, you can supply beer for the local beer bar, small dinning room and the little beer stands, beer gardens. But most of the buyer will install the 5BBL beer brewing equipment in the hotel, their own business restaurant etc, for the clients who have food and beer together.

800L(7BBL):

Similar with the 5BBL beer brewery equipment the 800L(7BBL) beer equipment also mostly installed at the hotel, large and luxury dinning rooms, etc. The 7BBL brew house tanks can be made by the red copper of its out tanks, of course inner tank should be SS304. The copper material is not easy for surface guard and protection, but it is sunshine in light, beautiful and luxurious, extravagant. Except the boiling kettle, beer tanks and conical fermentation tanks, also they can be added with the keg washing machines and keg filling machines, then people can sell beer by kegs.

1500L (15BBL):

The 15BBL beer brewery equipment is usually used for the commercial beer supplier. Except the beer brewing equipment from miller, plate heat exchanger, mash lauter tun, boiling kettle and the fermentation tanks, bright beer tanks, also they need the keg washing and keg filling machines for beer business. We need confirm every electrical appliance voltage according to the buyer; local voltage condition, Europe and North America is 220V, 3Phase, China Russian will be 380V 3Phase but Indian will be much higher voltage in 415V 3phase. It is very important and serious item before the production.

2000L brew house:

It is large beer brewery equipment, the whole system will need a much larger construction area.
The 2000L beer tanks material of stainless steel will be more thick than the smaller tanks, which is very important for ensure the tanks service life. Buyer need prepare a building with enough space. The 2000L beer brewery equipment we sent to USA very much, they brewing beer for sale. We will arrange the brewer and engineer to your city for the whole system connection and equipment assembly.

As about the steam boiler, if you choose the steam heating, you can buy the steam boiler from your local market. It is convenient install and after-sale service guarantee.

1. Main tanks, vessels and machines will be packaged with painted steel frames.
2. All spare parts, accessories and fittings will be packaged with painted steel box.
3. All items wrapped with soft package for protection.
4. Standard shipping containers will be used for general purpose.
5. All equipments will be loaded into containers according to exact container layout drawings.
6. After loaded into containers, all equipments will be well fixed to the containers.

Professional Pre-service:

1. We can supply design service free according to customers’ request.

2. We can supply budget assessment service upon our many years’ experience.

3. Customers are welcome to come to our plant base to visit and inspect, and we would like to give a warm reception.

Sound After-service:

1. Our brewmasters or engineers are available to supply service at buyers’ appointed places.

2. We will give timely effective instruction about application of equipment as best as we can.

3. We supply turn-key project.

We are your partner throughout the entire brewery development process. We will be as involved as you are comfortable with; it's an honor to be a part of your team. Always at your fingertips - you can count on us for solutions, not just some tanks and pipes.

                   Please feel free to contact us,

                                                    and you will get IDEAL BEER BREWERY EQUIPMENT ^_^