RV reducer
- 60000 Set / Sets per Month
- Shanghai
- T/T
Product Details
Gearing Arrangement: | Bevel / Miter | Output Torque: | 19-53 (N.m) | Rated Power: | 0.00-0.37 kw |
Input Speed: | 1400 (rpm) | Output Speed: | 14-186.7 (rpm) | Place of Origin: | Zhejiang, China |
Model Number: | NMRV40-63B5 | Brand Name: | TK-Chem |
Product Description
Specifications
Low noise reducer hollow worm gear reducer--- NMRV40-63B5Custom processing
Production capacity range: 0.06KW-11KW
Production speed ratio range: 7.5-100
Product characteristics: good strength, high torque, good heat, long life, ultra quiet, stable performance, full, wide applicable range model.
Aluminum alloy reducer installation code:
1, alloy reducer of NMRV type must be firmly installed on the machine, can not appear loose condition.
2, in the installation, must again see the turn is correct.
3, if the aluminum alloy reducer before use have been placed over a longer period of time, and the oil seal and not submerged in the oil, the oil should be replaced immediately.
4, be sure to avoid the aluminum alloy reducer installed on the sun violent places, or extreme environment. If the motor and supporting the use of, be sure to install cooling device for motor, improve the circulation of air, avoid the impact of heat efficiency.
5, please observe the JRST work environment standard value (-5 ~ 40 °C), if more than the standard value, should be adjusted or technical processing.
6, the main parts (gear, shaft coupling, etc.) must be securely mounted on the output shaft, screw holes using a standard or other device to ensure proper operation, to avoid damage caused by bearing.
7, do not let the oil seal and exhaust valve with any paint.
8, such as aluminum alloy reducer is provided with an oil injection hole, should put the transport stoppers replaced before use, to an exhaust plug. Must first check the lubricating oil level before use.
9, for the first time when using do not immediately to the load to the highest point, should gradually increase.
10, and the motor supporting the use of, in the peripheral device protection measures, to prevent damage.
11, when the operating environment below - 30 degrees Celsius or above 60 degrees Celsius, oil seal replacement special materials required.
12, alloy reducer should be placed on a flat or rigid support in place, and avoid the abnormal vibration and its surrounding so predictable, with the foot bolt washer pre advice.
13, when the aluminum alloy reducer in outdoor work, to do a good job protection, sunscreen, waterproof measures for its.
The output shaft speed reducer 14, end install the pinion, coupling or pulley, the shaft end of the screw press mode, and non percussion.
15, the new aluminum alloy reducer first run 160 hours, should replace the oil to the oil in the period, after about 4500 hours.
16, speed reducer box body should keep enough oil, measure and regularly check the oil.
17, prohibited the use of hybrid synthetic oil and mineral oil to use.
Contact Us
- Hangzhou Tiankai Import And Export Co., Ltd.
- Contact nameAmy Chen
- Phone86-0571-82778679
- AddressNO.2-102 ROOM, BUILDING4, WENYUAN SQUARE, XIAOSHAN AREA, HANGZHOU, CHINA Hangzhou,Zhejiang
bottles | dyestuff | Machinery | New Products |
others | pigment | plastic & plasticizer | Resin |
- TF78-Y1.1-4P reducer TF78-Y0.55-4P-166.47-M3-VI clamp spring model
- R37-Y3-4P reducer R37DV132S4-6.88
- FAF67-Y5.5-4P reducer FAF67DV132S4-5.93
- BWD16-17 Planetary reducer BWD11-17 Input torque
- RXF97-Y30KW-4P reducer RXF97DRS225S4BE30-1.64-M2-270 model
- Reducer wave box XLEDY8130A-3053-0.18KW
- XW2-35 reducer with motor XW7-35 can be configured with power
- Reducer XWEDY8130A-2065-0.25KW-4P
- Xwd4-71 gear model meaning cycloidal pin reducer XWD4
- FA57-Y1.1KW-4P reducer FA57DM80N4-68.22-M1-0
- SHZ47-Y0.12-4P reducer SHZ47-YEJ0.12-150-M1-180° parameter
- GSA99-Y4-4P reducer GSA994P-111.52-M1-1
- FF67-Y1.5KW-4P reducer FF67-MV3KW-4P-67.65-B3-90
- RF13-Y15KW-4P reducer RF13-Y30KW-4P-65.58
- TKAF158-Y30-4P reducer TKAF158-E30-79.37 gear
- RX87-Y15KW-4P reducer RX87DRE180M4-3.48
- KA77-Y1.5-4P reducer KA77DRS90L4BE5-128.52-M4
- BlY220-9 reducer with motor BlY270-9
- GFAB37-Y0.75-4P reducer GFAB37-Y0.55-38.31-M4-180-3
- XLED64-595 reducer wave box XLED64-595-0.75 foot size
- BWD14-29 Cycloidal reducer BWD14-29-11 Vertical horizontal type
- BlY5-35 cycloidal gear motor BlY3-35 output torque
- Xwd4-29 can be configured power difference is what cycloidal reducer XWD4
- PK07-Y5.5-4P reducer PK07-YVEJ3-4P-7.42-M1-J2
Popular Searches
Recommended Products
- Mixer worm gear, chef machine spiral worm shaft
- Hobbed worm gear, automotive engine worm shaft
- 45KN vibration motors 2.2KW Explosion proof vibrator motor
- Direct Drive Motor AMKSDM-085-145
- Italian Elco motor VN 5-13 32W 5W fan freezer motor agent
- CNC Lathe Insert Machine External Turning Tool Holder
- Rubber Lined Vertical Flap Check Valve
- CNC sheet metal fabrication stainless steel fabrication aluminum fabrication
- Laser cutting/ bending/welding custom sheet metal fabrication Metal surface treatment
- Custom stainless steel sheet fabrication,metal case fabrication,custom metal case
- High precise Machining parts stainless steel laser cutting service
- High precise Machining parts stainless steel laser cutting service
Find Similar Products By Category
- Mechanical Parts & Fabrication Services > Power Transmission Parts > Speed Reducers
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Amy Chen
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-