Utp/ftp/sftp Cat5e/cat6 Lan Cable Network Cable
utp/ftp/sftp cat5e/cat6 lan cable network cable
Spec: 4Px24AWG BC Conductor+0.91mm PE Insulation+5.2mm inner PVC Jacket + PVC/PE outer PVC
Descriptions:
1) Rated temperature: 60°C, 75°C
2) Bare solid of stranded copper conductor
3) Color coated PE insulation
4) Rip cord (optional)
5) PVC or LSZH jacket
6) Flammability grade: CMX, CM.CMR
7) Pull out box packing available
Conductor:
Material:Bare copper
Number of pairs:4pairs
AWG:24awg
Conductor diameter:0.515±0.003mm
Insulation:
Material:HDPE and FRPE
Diameter:1.02±0.005mm
Average thickness:0.212mm
Minimum point thikness:0.2095mm
First screen:aluminum mylar shield(superposition rate:25%)
Overall screen:80/0.1mm TC braid shied(coverage:60%)
Braiding shield(48/64/96/112x0.12mm or 0.15mm or 0.16mm,braid material,AL-MG,CCA,CCS,copper or tinned copper for braid),FR/PVC or LSOH jacket
Jacket rip cord:optional
Sheath:
Material:PVC or LSOH
Nominal diameter:6.0±0.2mm
Average thickness:0.50mm
Operating temperature:-20 to 75°C
Minimum bend radius (install):(8*OD)
Flame test:CMX,CM,and IEC60332-1
Reference standard:TIA/EIA568B and IEC/ISO11801
Lan Cable Specification | ||||||||||||||||||||
| ||||||||||||||||||||


1. What kinds of products does SANHE CABLE manufacture?
1)Bare Conductor ,such as AAC,AAAC,ACSR,ACAR,AACSR,ACSR/AW and so on;
2)Aerial Bundled Cable (1kV-35kV ),such as Duplex,Triplex,Quadruplex Drop Wires and so on;
3)PVC Insulated (Flexible ) Wire ;
4) PVC Insulated and Sheathed (Armoured) Power Cable;
5)Low, Medium, High Voltage (1kV-220kV) XLPE Insulated (Armoured) Power Cable;
6)Welding Cable, Control Cable, Concentric Cable, Rubber Sheathed Cable and so on.
2.Which markets do you involve mainly in?
Our products have been exported mainly to Australia, Russia, Africa, Middle East, South-east Asia, South America,Central America,North America, Europe ,Austrapa, etc.
3. Which standards do you comply with when you produce the electrical wires and cables ?
We are able to produce electrical wires and cables based on GB, JB, IEC, BS, DIN, ASTM, JIS, NF, AS/NZS, CSA, etc. Meanwhile, we can design and manufacture the cables according to the samples and technical specification the customer provided.
4. What is the min.order quantity ?
It depends on the type and size of electrical wires and cables. For some small electrical wires, 100 meters can be accepted .But for the power cables with medium or high voltage, that should comply with the property of installed equipments. Anyhow,we will try our best to solve the problem and meet with the requirement If you have special request.
5. What is the production capacity per week or per month ?
For the bare conductor, we can finish 3000 tons within one month. For power cables, that depends on the type and size. The total output value per month is approx. USD3,000,000.00 for insulated aluminum cables and that is approx. USD8,000,000.00 for insulated copper cables.

Send Inquiry to This Supplier
You May Also Like
-
Communication CableNegotiableMOQ: 2300 Meters
-
High Quality Single Mode Fiber Optic Patch Cord Jumper CableNegotiableMOQ: 1
-
High Qualiy Black /Red Test Lead Set for MultimeterUS$ 0.2 - 0.9MOQ: 500 Pieces
-
Solid Copper FTP Cat5e LAN Cable/Network CableUS$ 1 - 20MOQ: 10 Boxes
-
Stock Amp Cat6 Patch Cord Amp Cat 6 Patch CordUS$ 0.01 - 10MOQ: 500 Pieces
-
N Female to Right Angle Mmcx Pigtail Coaxial Cable With 179 Cable 8cmUS$ 0.67 - 1.27MOQ: 100 Pieces
-
Fiber Optical Patch Cord SC-FCNegotiableMOQ: 1 Piece
-
Roto Mold Magazine HolderNegotiableMOQ: 1 Set
-
Mineral Insulated Thermocouple CableUS$ 2 - 10MOQ: 10 Pieces
-
Bare Copper Cat6 Unshielded Patch CableUS$ 0.5 - 2.5MOQ: 10 Pieces

