Eletric Glass Tint Price With ISO9001:2008&CCC

Specifications

Tinted  glass 

     Body tinted or heat absorbing glasses are produced by the float process with the addition of small quantities of metal oxides to color the normal clear glass mix. This coloration is achieved through adding metal oxides at the smelting stage.

     Addition of color does not affect the basic properties of the glass, even though visible light reflectance will be slightly higher than clear glass. The color density increases with thickness, whereas the visible transmittance decreases correspondingly as thickness increases.

     Tinted glass reduces solar transmittance by absorbing a large proportion of the solar energy the majority of which is control and energy reduction.

     Our comprehensive range of soft natural colors compliments modern building materials to provide an exciting and different look to new and exiting buildings.

     Tinted float glass is distortion-free, precision flat and transparent glass. It is manufactured by floating a ribbon of molten glass over a bath of molten metal. The ribbon is gradually cooled in an annealing lehr, and then washed and cut into the desired sizes.

• FEATURES: 

  The body tinted float glass can reduce transmission of the sun's harmful rays by up to 80% thus minimizing fading to interior furnishings. 

   The comprehensive range of soft natural colors compliments and harmonizes with modern building materials to provide an exciting and different look to new or existing buildings.

Description:

Electric heated glass consists of a double glazed unit of which one pane has a thin metal oxide coating connected to an electrical power source using electrodes. These electrodes run along each side of one of the panes making up the sealed unit. When switched off, the glazing behaves as standard insulating glass. When switched on, the conductive coating converts electrical energy into heat. Depending on the intended use, the conductive coating can be applied to surface 2 or 3 of the pane (see figure 1)so as to radiate heat to the interior or exterior of the room.

Characteristics:    

• Comfort : Because the temperature of the interior pane can be adjusted close to room temperature, Electric heated glass eliminates the discomfort often felt near cold glass. Electric heated glass also eliminates the thermal radiation and convection that creates the sensation of a cold draft. This means that you won’t need to raise the room temperature to feel comfortable next to a window when it’s cold outside.
•   Heating : In temperate climates, Electric heated glass can be an effective heat source, alone or along with another type of heating such as radiant floor heating system or convection heaters.
•   Condensation and Frost Control : Condensation on the inside of windows occurs when their temperature is below the dew-point of the air indoors. When damp indoor air cools, it reaches the saturation point. This is the dew-point of air indoors. If the window surfaces get colder, the moisture in the air condenses on the cold surfaces in the form of water that will become frost if the temperature drops below freezing. When kept above the dew-point of air indoors, Electric heated glass completely eliminates condensation and frost on inside panes.
•   Snow Control : By placing the heated side to the exterior of the sealed unit, Electric heated glass controls snow and ice build-up on sloped glazing.
•   Safety : Electric glass is tempered, heat strengthened or laminated for greater impact and thermal shock resistance. The conductive coating is sealed inside the double-glazing to prevent short circuits in case of water infiltration and to protect occupants from accidental contact with the electrified surface.
•   Energy Consumption : Tests conducted in a bi-climatic room by the Energy Technologies Laboratory (a Hydro-Québec research institute) the use of heating glass as a supplementary heat source does not lead to appreciable additional energy consumption because the cost of use is offset by the savings from lowering the room temperature. Used with low-e on the exterior side, heat is reflected inside. Heat loss to the outside is equivalent to that of a regular sealed unit. Tests have also shown that when the glass is kept at 24°C (75°F) and the room temperature is 20°C (68°F), Electric heated glass delivers a heat gain of 50 watts per square meter (4.6 w / p2).
•   Easy Installation : Electric heated glass consists of a sealed unit along with a length of electric cable extending from one extremity. Like a conventional insulating glass unit, the heated glass is installed by a glazier, and its electric connection must be done by a master electrician.
•   Easy Maintenance : Electric heated glass requires the same care as a conventional glazing. Under very humid conditions, cleaning is even easier because there is no residue build-up due to condensation.
•   Appearance : Electric heated glass has the same optical quality as standard low-e glass and does not change color when switched on. The power cables are fully hidden in the window frame and the wall. The electrodes are very unobtrusive and are almost entirely hidden once the unit is installed in the frame.
•   Easy Decorating : Curtains and blinds can be installed on windows with heated glass. Electric heated glass eliminates the need for baseboard heaters beneath windows, making interior decorating even easier.

Applications:    

  Residential, commercial and institutional

  Curtain walls, greenhouses, sunrooms, stores and restaurants, hospitals, indoor pools, hot tubs, skylights, canopies, bathroom windows.

 Industrial  freezer, regrigerator,display cabinet, cake cabinet,food display cabinet,etc.

Concept

HUAYING GLASS'S  ADVANTAGE:

 ABOUT COMPANY

 Dalian Huaying Glass Product Co.,Ltd. which was set up in 1999 in Jinzhou New District,Dalian city,is always devoting herself to develop and manufacture energy saving products.Huaying glass provides about million sqm high quality energy conversation glass products every year to Industry,Building,Transportation and Solar Energy fields.

ABOUT PROGRESS

2004   Won the excellent supplier title from Dalian Sanyo Cold Chain Co.,Ltd.

2005   Passed ISO9001 certifiction

2006   Won the excellent supplier title from Dalian Sigma Elevator Co.,Ltd.

           Won suppliers special cintribution award from Japan ESPEC environment equipment company

2008  3mm tempered glass passed American SGCC certifiction

           Became Saint-Gobain CLIMAPLU's member

2009  'HUAYING GLASS' became 'Dalian City Famous Trademark'

           Passed China's energy-saving certifiction 

           LOW-E insulating glass won the title of 'Liaoning small and medium       enterprises  specialization,new product'

2010   Won the honorary title of 'Dalian City promise-keeping unit'

           Won the Best Costomer Service Awarad from sanden Shanghai Refrigeration Co.,Ltd.

2011   Won the title of 'Dalian City Industry and Commerce Inspection Exemption Enterprise'

We have the following certifications:

 1)AGC MARK

2)3C

3)CQC

4)SGCC(3mm tempered glass)

5)  ISO 9001:2008

13 years' experience

10 years' product quality assurance

One-stop glass procurement

Package: standard wooden case

Production ability of elcetric heated glass:

The company imported advanced production line of  electric heated  glass from Switzerland.

Welcome to our Factory visit and communicate.

 To konw more about our corporation, kindly visit our website: