LED Dimmer

Specifications

LED Dimmer 

I. Specification

1. Weight  150g + 50g (remote controller)

2. Dimension   100mmx72mmx25mm

3. Input/output Voltage  12V/24V DC  

4. Max Output current  8A

5. Output signal   256 levels brightness, PWM 4-wire and 3-loop controller, common anode

6. Connector  plug terminal

7. Wireless remote control, the control distance is 30~50M at open field

8. Standard DMX512 signals Input/output connector.

II. Features:

1. It can adjust the brightness of connected lights freely and it has memory function.

2. Remote signal enhancement mode to increase the control distance.

3. Both manual control and wireless remote control are available, remote signal enhancement mode allow the remote distance to reach 50~100M at a wide area.

4. Standard DMX512 slave model and many controllers could be connected together one by one.

5. It can code DMX address in series automatically.

Functions:  

1. Brightness

It will display the memorized brightness playing last time. You can change the programs by adjusting the button "program" or the remote key "A". You can push the button "+" "-" or remote key "B" "C" to adjust the brightness.

2. Work synchronously

Many pieces controllers can realize synchronous effects by connection of the DMX signal input and output one by one. Just connect the DMX output port of former controller to the DMX input port of the next controller, one by one like this way, and then all the controllers after the first controller will become slaves and being controlled by the first controller. The total connection length should be less than 100M.   

3. DMX slave control function

The DMX input port can receive standard DMX512 signal, each controller owns 1 channel. When the input port of controller receives signal, the manual function and remote function will be prohibited at once, then the controller is only controlled by  the controller or DMX console connecting at the input port.  Once many controllers connect together, all the slaves controller will be controlled at the same time. 

4. Coding function.

This controller can support a coder to code address freely, and series coding function can also be realized by operating this controller. After connecting all controllers in series, push the 3 red buttons of the first controller, the address of first controller will become 1. At the meantime, the indicator and the lamps connected will flash green, which means that they are in coding mode. The controllers connected will automatically change to the codes 2, 3, 4...