LED RGB Controller

Specifications

LED RGB Controller 

I. Specification

1. Weight-150g + 50g (remote controller)

2. Size-100mmx72mmx25mm

2. Dimension-- 100mmx72mmx25mm

3. Input/Output Voltage-- 12V/24V DC

4. Max Output current-- 8A

5. Output signal-- 256 levels brightness, PWM 4-wire and 3-loop controller, common anode

6. Connector-- plug terminal

7. Memory capacity-- 16KB

8. Wireless remote control, the control distance is 50~100M at open field

9. Standard DMX512 signal Input/output connector

II. Features

1. Programs can be customized.

There is built-in memorizer for memorizing programs. After editing programs with software on the computer, you can down-load the programs into the built-in memorizer. It is convenient for customers to make and change programs. This controller can contain more than 200 programs which includes 7 fixed programs.  

2. It can adjust the brightness of static programs freely.

3. It can adjust the speed of color changing programs freely.

4. It can enhance the RGB remote signal and increase the remote distance.

5. Both manual control and wireless remote control are available, remote signal enhancement mode allow the remote distance to reach 50~100M at a wide area.

6. It can automatically record the display model and data setting. It plays the program and data automatically recorded when it starts. 

7. Standard DMX512 slave model and many pieces of controller can be connected together one by one. 

8. It can code DMX address in series automatically.

Functions:

1. Programs display

A. It will display the memorized program playing last time. You can change the programs by adjusting the button "program" or the remote key "A". You can push the button "+" "-" or remote key "B" "C" to adjust the brightness of static programs or the speed of dynamic programs. NO. 1~7 are the fixed programs of single color. Numbers from 8 are customized programs and there are 9 models at present. So the total programs are 16, then you can select programs from 1~16.

2. Work synchronously

   Many pieces controllers can realize synchronous effects by connection of the DMX signal input and output one by one. Just connect the DMX output port of first controller to the DMX input port of the second controller, one by one like this way, and then all the controllers after the first controller will become slaves and being controlled by the first controller. The total connection length should be less than 100M.