china flame polisher good quality and high precision

Specifications

china flame polishing
1.CE certificate
2.Innovation backfire-proof fittings
3.intellectualized pressure switch

china flame polisher

Application:

1.Organic Glass Industry

Organic glass ( acrylic ) polishing. High temperature flame can beautifully process the organic

handicraft articles.

2.Electronic Industry

IC encapsulation

3.Semiconductor

4.Nonferrous welding ,braze welding

In the process of welding nonferrous metal ,oxygen is not necessarily needed by Oxy-hydrogen Generator.
It can save costs by more than 30% compared with the other way with the same-materials and same workloads .

a.Welding all kinds of platinum ,gold ,silver , copper ornaments and so on.

b.The fusion of lead accumulator and tin poles.

5.School laboratory

Providing convenient and safe oxy-hydrogen flame.

 

Characterics:   

Our Flame Polishers have better quality , performance and service to make contributions to the society.

• Effective—permanent and effective current with high operation efficiency.
• Energy saving—The electrolyser adopts the advanced serial-to-paralleled system, which reduces the energy consumption and increases electrolyzation efficiency.
• Better quality—Simple and stable structure
• Safe—Electric leakage protection device and anti-backfire design ensure the safety.
• Flexible—Light in weight with easy operation.

Specifications 

Model

Power	AC220V 350W	AC220V 400W	AC220V 600W
Dimensions	35*22*30mm	35*22*30mm	35*27*31mm
Weight	11kg	14kg	14kg
Gas flow	50-70 l/h	80-120 l/h	80-160 l/h
Torch	1 set of torch	1 set of touch	2 set of torch
Electrolyzing case	Single case,3 layers	Single case, 3layers	Double case, 6 layers
Consumed fuel	Water, from best to ordinary are: distilled water, purified water, cold boiled water, tap water, and , mineral water.
Safety fittings	Innovation backfire-proof fittings, intellectualized pressure switch, safety gas releasing valve and multilevel explode-proof design.
Work environment	0-50 degree centigrade well ventilated. Better 50cm above the ground.

Operating Procedures:

1.Dissolving Electrolytic Powder
Add water and electrolytic powder(NaOH or KOH into the container and stir, and then cool off for 10 minutes.The ratio of electrolytic powder and water is 1:5.

2.Adding electrolytic solution

(1)Unscrew the nut of water inlet
(2)Fix funnel to avoid the leakage of electrolytic solution
(3)Pour the electrolytic solution into electrolysis trough
(4)It could be better to add the solution up to 90%
(5)Screw nut of water inlet

3.Adding filter agent
(1)Turn left and unscrew the filter cup
(2)Add filter agent into the filter cup, less than 1/2 
(3)Install the filter cup to its upper cover and screw it.

4.Power-on Test
(1)Connect flame gun to gas outlet using rubber tube. Choose proper nozzle according to the size of raw edges 
(2)Turn on the power, if the indicator light works, blower shifts, and at the same time, turn off flame gun and the pressure value increases, all is normal.
(3)Light with direct fire, let the flame point to raw edges directly or tiltedly and keep proper distance, and then scan raw edges evenly.

Maintenance

1.Add water when the water line becomes lower than 50% and electrolytic solution is unnecessary. 2.About 3 months later, when electrolytic solution turns black, dirty or lose effectiveness, please replace the solution. Firstly reverse the machine and pour the solution, and then use clean water to wash the electrolysis trough and then add new electrolytic solution. 3.When adding water and filter agent, or adding water and filter agent, turn off the flame gun and power firstly, and then turn on the adjusting valve of flame guns and discharge residual gases.