Tension set for ADSS cable

Specifications

Tension set for ADSS cable
1.Least wear;
2.Easy installation;
3.Special design;
4.Reduce vibration.

Tension Sets for Short Span ADSS

General information:

Tension Sets are intended for connecting ADSS cable and poles. Aluminum Clad Steel wires can protect and provide cushioning to the ADSS cable. The special design of preformed rods makes ensure that Tension Sets can not cause undue stress to the ADSS cable. As a result, the normal lifetime of cable system is ensured.

 

 

 

1.1.Structure and Material:

 

1.1.1 Shackle--Hot dipped galvanized steel. Shackle is connected with Reinforcing Pole/Tower units.

 

1.1.2 Thimble ---Hot galvanized cast steel is plugged in shackle for protection and connection dead end rods.Thimble and avoiding Tension set exit close to poles. It is sure that the cable has enough winding radius.

 

1.1.3 Dead end Rods--Rods are made from Aluminum clad steel, are assembled into one subset with a layer of firm emery inside, in order to increase gripping power of Tension Sets while decreasing side pressure. Sets are color marked to reduce misalignment errors and to speed installation.

 

1.1.4 Other structure designed base on requirements

 

 

 

1.2.Technical Data:

 

1.2.1 Recommended Span Length: less than 100m

 

1.2.2 technical data of dead end rods:

 

Art.no	Dia.of ADSS(mm)	rods/set	Dia.of rods(mm)	Length(mm)	color code
ANLS 1000	9.0-10.0	4	2.9	917	black
ANLS 1110	10.1-11.1	4	2.9	917	red
ANLS 1220	11.2-12.2	4	2.9	917	yellow
ANLS 1330	12.3-13.3	4	2.9	917	blue
ANLS 1440	13.3-14.4	4	2.9	917	green
ANLS 1560	14.5-15.6	4	2.9	917	black
ANLS 1670	15.7-16.7	5	3.6	1200	red
ANLS 1790	16.8-17.9	7	3.6	1200	yellow
ANLS 1910	18.0-19.1	7	3.6	1200	blue
ANLS 2030	19.2-20.3	7	3.6	1200	green