HT 18-100-750 type shutter door forming machine

Specifications

It use for industrial workshop, residential house, warehouse, simple steel shed etc.

Name of goods: 

HT 18-100-750 type shutter doorforming machine

Profile: 

1)  Wave height : 18mm

2)  Center distance of two waves : 100mm

3)  Effective width : 750mm

4)  Feeding width : 1000mm

5)  Thickness of formed steel: 0.35mm-1.0mm

Technique parameters of the processing line:

1). we designed the parameters of highway guardrails roll forming machine for you as follow :

(1) : (high grade) 250mm H shape steel welding

(2) Thickness of middle plate : 12mm

(3) Step of forming roller : 19steps

(4) Diameter of shaft (solid shaft): 74mm

(5) Material of shaft (solid shaft): (high grade) 45# Steel, quenching and tempering treatment

(6) Treatment of rollers : hard chromize coated 0.05-0.07mm

(7) Drive type of roll forming machine : drive by chain

(8) Chain : 25.4 mm (high grade)

(9) Bearing : 6210 (high grade)

(10) Reducer : 5# cycloid reducer (high grade)

(11) Power of main motor : 3KW

(12) Voltage : 380V/50Hz/3phase

(13) Line speed : about 9 m/min

(14) Feeding width : 1000mm

(15) Suitable coil thickness : accepted thickness for steel coil is 0.35mm-1.0mm.

(16) Motor power of hydraulic station : 3kw

(17) Oil pump of hydraulic station : gear oil pump (high grade)

(18) Hydraulic cutting: cutting controlled by PLC

(19) Accuracy of cutting : +/- 2mm

(20) Razor blades material : Cr12, quenching 58-62 °.

(21) Appearance size of main forming machine : 7.2m (length)*1.2m (width) *1.3m (height)

(22) Electrically controlled system : entire machine controlled by PLC

(23) PLC : DELTA(TAIWAN)

(24) Frequency converter : DELTA(TAIWAN)

(25) Frequency converter power : 3.7KW

(26) Encoder : RUI PU(high grade)

(27) Controlling desktop : text panel screen(high grade)

(28) Electrical parts : DELIXI or CHINT

2). we can customize the design and fabrication on the particular type of machine according to the request of customer.

 

 

 

 

 

Production flow chart:

Decoiling---Active feeding---Roll fomring---Cut to length---Product rack

 

 

Machine componets:

(1) Manualun-coiler                                 1 set

(2) Feeding device                                   1 set

(3) Roll-forming M/C                                1 set

(4) Hydraulic cutter                                  1set

(5) PLC control system                               1 set

(6) Hydraulic station                                 1 set

(7) Product rack (un-powered)                         1 set

 

Technical specification: ( Photos just for reference )

(1) Manual un-coiler:

Unpowered, single head, to support and uncoil the steel coil, tenses the coil by manual, it is convenient for the workers to operate.

   The coil inner diameter: φ450-550mm;

   Max. outer coil diameter: φ1000mm-1250mm

   The max capacity: 5T

 

                                     

Step of forming roller	19 steps
Diameter of shaft	74mm
Material of roller	45# Steel
Treatment of roller	hard chromize coated 0.05-0.07mm
Reducer	5# cycloid reducer (high grade)
Motor power	3kw
Razor blades material	Cr12, quenching 58-62 °
Appearance size of main forming machine	(length) 7.2m * (width)1.3m*(height)1.2m
PLC	DELTA(TAIWAN)or Mitsubishi(JAPAN)
Frequency converter	Frequency converter

 

Wave height	18
Wave length	100
Cover width	750
Coil width	1000
Thickness of material panel	0.35-1.0mm