Contact Platform Support
Help CenterThe Blast Furnace Equipment Design and Installation China in the Blast Furnace The Small Blast Furnace
Related Products
-
Nickel Iron Sintering Machine Energy Conservation Sintering Machine Industrial Furnace The Blast Furnace SmeltingUS$ 300,000 - 50,000,000MOQ: 1 Set -
Blast Furnace IronmakingSintering Ore Processing,sintering MachineUS$ 300,000 - 6,000,000MOQ: 1 Set
-
Nickel Iron Smelting Blast Furnace Repair and Installation ServicesNickel Iron SmeltingUS$ 500,000 - 900,000MOQ: 1 Set
-
Small Blast Furnace, Sintering Machine, Sintering Machine Equipment.US$ 200,000 - 3,000,000MOQ: 1 Set
-
The Lowest Price of the Blast Furnace,sintering Machine/blast Furnace/The Blast Furnace Smelting/sintering Machine/US$ 2,000,000 - 40,000,000MOQ: 1 Set
Welcome to visit our company, if you are interested in our products, please do not hesitate to contact me, thank you !
1 blast furnace lining refractories, packing, mud, etc., should comply with the design requirements, and shall not be less than the relevant provisions of the national standard.
2 tuyere platform should have a certain slope, and consider the drainage requirements, width should meet the needs of production and maintenance, the above should be laying fire-proof material.
Aroun
3 furnace base should be kept clean and dry, and should not be accumulated water and waste.Furnace base tank should be kept free of traffic.
4 the tuyere, slag and water jacket, should be strong, tight, should not leak gas;In and out of the water pipe, shall have the fixed support;2 sets tuyere, slag mouth two, three, and also should have their own fixed support.
5 blast furnace should be installed around the furnace body maintenance platform, the platform should be gaps between the furnace shell, maintenance platform should be set up between the two ladder.Walk ladder mouth should not be located in slag, iron mouth above.
6 to prevent water to case of power failure, the blast furnace water supply facilities should be accident.
7 cooling parts prior to installation, the application of diameter of pipe diameter of 0.75 ~ 0.8 times the ball to ball test, and water pressure test in accordance with the design requirements, with 0.75 kg of wooden hammer knock at the same time.By 10 min water pressure test, no leakage, pressure is not greater than 3%, before use.
8 furnace cooling system, should be designed according to the requirement
Shanxi JinYe metallurgical machinery manufacturing co., LTD., located in southern shanxi linfen.Is located in linfen, yuncheng, jincheng, the centre of the three cities, it has advantage of unique resources of coal, iron, highway and railway through the county, transportation is very convenient.The company was founded in 1986, is specialized in the production of metallurgical machinery and equipment manufacturers.Company set design, manufacture, installation, technical transformation into an organic whole, provides the omni-directional service for metallurgical industry
Send Inquiry to This Supplier
You May Also Like
-
Efficient Copper Cable Granulator for Scrap Wire RecyclingNegotiableMOQ: 1 Set
-
40T Electric Tilting Machine for Heavy Parts RotationNegotiableMOQ: 1 Set
-
High Efficiency Energy Saving Fluidized Bed Dip Powder Coating Equipment Eco Friendly for Refrigerator ShelvesUS$ 2000 - 40000MOQ: 1 Set
-
Replaceable Knives Wood Chipper Moveable Type Chips Ready for Compost or BoilersNegotiableMOQ: 1 Set
-
Metal Zipper Chemical Cold Plating Machine (13 Tanks)US$ 1,000 - 10,000MOQ: 1 Set
-
Made In China JOY 1330/1325 Portable Air Plasma Cutting MachineUS$ 2,000 - 6,900MOQ: 1 Set
-
Automatic Infrared Length Cutting SystemNegotiableMOQ: 1 Set
-
Factory Supply Stainless Steel Sheet Polishing MachinesUS$ 2,000 - 5,000MOQ: 1 Set
-
Cheap Copper Wire Scrap 99.99 Recycling MachineUS$ 13,000 - 16,999MOQ: 1 Set
-
High Output Recycling Copper Wire Machine/Wire Recycling Machine/Copper Wire Recycling MachineUS$ 2,000 - 15,000MOQ: 1 Set
