Contact Platform Support
Help CenterBIPV Thin Film Flexible Solar pv
Related Products
-
10 Watt Solar RV KitUS$ 115 - 120MOQ: 1 Set -
150W Household Solar PV SystemUS$ 510 - 628MOQ: 1 Set
-
72W PVL-72 Thin Film Flexible Solar LaminatesUS$ 156 - 180MOQ: 50 Pieces
-
72W Peel and Stick Adhesive Film Back Flexible Solar PanelUS$ 156 - 180MOQ: 50 Pieces
-
UNISOLAR 72W Flexible Solar ModuleUS$ 156 - 180MOQ: 50 Pieces
Specifications
BIPV thin film flexible solar pvThin film amorphous silicon solar panel
25 year warranty
MOQ: 50 PCS
BIPV thin film flexible solar pv
General Information about BIPV
BIPV panels achieve their lightweight and flexibility advantages over glass-based crystalline PV panels by:
- Thin-film amorphous silicon thickness less than 1 micron
- Stainless steel substrate of 5 mil
- Protective coating with EFET film
- Average weight of 0.7Ibs/sq ft
Amorphous silicon alloy thin film technology can be 100 times less thick than that of conventional cells, thereby significantly reducing materials cost.
Crystalline PV panels are rigid and fragile. They are almost four times heavier per square foot due to the use of glass as a laminating and protecting material. Plus, the required metal framing adds additional weight.
The PVL flexible solar panels utilizes the unique Triple-Junction thin-film silicon solar cells, where the blue, green and red light of the sun is absorbed in differenct layers of the cell. This technology results in better performance in low and diffuse light conditions.
Durability
Chance of damage to PV panels is increased due to the fact that roof surfaces require access by service personnel.
PV Laminates are extremely durable and can sustain much greater impact than glass-based PV panels.
PV Laminates can sustain significant damage and still produce most of their rated power.
The output of glass-based PV panels drops to zero over time following damage to glass surface (even small cracks) due to the penetration of moisture.
Removal and replacement of glass-based PV panels can be expensive and can result in damage to other panels.
Peel and stick adhesive backing is capable of withstanding 160 mph wind loads
Wind and water-tight roof
20-year power output
Installation
Suitable for both renovation and new construction
Peel and stick adhesive backing
PVL Series modules are lightweight and flexible.
1. These laminates are field applied (i.e. cold bonded) to Zn-Al coated steel pan (Galvalume® and Zincalume® only) pre-painted with Kynar 500® or Hylar 5000® based (70% or more) PVDF coating using a “peel and apply” application process.
2. PVL laminates solar panels can be installed on the TPO and EPDM Membrane Roofing Systems.
TPO-----Thermoplastic olefin
EPDM---Ethylene-Propylene-Diene Monomer
Send Inquiry to This Supplier
You May Also Like
-
Office, House, Home Solar System Complete Set With Panels, Energy Storage Battery and InverterNegotiableMOQ: 1 Set
-
Saip/Saipwell 20kw Solar System PriceUS$ 1 - 1,000MOQ: 200 Pieces
-
Hot Sale Solar Panel Simulator ,Solar Module Simulator,Solar Simulator German QualityUS$ 1 - 35,000MOQ: 1 Set
-
Auto Electrical SystemUS$ 5 - 25MOQ: 600 Pieces
-
Solar Energy Water FountainNegotiableMOQ: 1000 Pieces
-
Flexible Film Solar Power Battery SystemNegotiableMOQ: 1
-
5kw 10kw 20kw 30kw Solar Systems Solar Power System for HomeNegotiableMOQ: 1 Piece
-
Singflo 6LPM 12/24 Volt Deep Well Submersible Pump Prices in IndiaUS$ 70 - 100MOQ: 10 Sets
-
Machining Services for the Solar IndustryUS$ 0.99 - 100MOQ: 1 Set
-
Solar ConnectorNegotiableMOQ: 1000 Pieces
