D2/1.2379 forged steel plate

Specifications

forged steel plate
1.1.2379/D2
2.T20~300mm
3.hot rolled or forging
4.for pouch mold,knife mold,screw mold,chinaware mold

1.2379 FORGED STEEL PLATE

1. Size:
Round Bar: 3.5-410mm
Flat: 8-90*205-610mm

2. Standard and Grade:
GB Cr12MOV/ AISI D2/JIS SKD11/ ASSAB XW-42/ DIN 1.2379

3. Delivery Condition
Soften Annealed: Less than 255HB

4. Applications
Sheet less than 6mm thick, efficient blanking dies, punch dies and stamping dies.
Various scissors, interlaid razor blades and wood cutting blades
Thread rolling dies and abrasion resistant sliders
Cold forged dies, thermoset resin molding molds and high-grade gauges, etc
Deep-drawing dies and cold extrusion dies

5 Characteristics
Our D2/1.2379 is an alloy tool steel with high content of carbon and chrome. After heat treatment, it has very high hardness and abrasion resistance. This steel also features in high hardenability and good dimensional stability. It is suitable for manufacture of cold-work dies and thermoset plastic molding molds which require high precision and long service life.
Pure steel quality due to vacuum degas refining treatment
Superior cutting performance, due to spheroidal annealing softening treatment
Crushed crystal structure bonded by forging and rolling, carbonized granules which are fine and even. So that there will be no cracking under quenching
For special adding of reinforcing elements molybdenum and vanadium, both the avrasion resistance and toughness are better the similar steel grade.

Chemical  Composition (%)
C	Si	Mn	P	S	W	Mo	Cr	V	Cu	Ni
1.48	0.26	0.24	0.019	0.006	---	0.46	11.63	0.21	0.05	0.06