Hot sale factory sale press mud brick machinery

Specifications

Hot sale factory sale press mud brick machinery

Lantian Mechanical Plant

Lantian Mechanical Plant was founded in 1980s. It has been a professional brick machinery area since 

1980s. Through 30 years' development, our factory has been specialized brick area over 30 years. Our

brick machinery includes press clay brick machinery,press mud brick machinery, press ash brick machinery,

etc. Apart from all kinds of brick machinery, our factory also produce other assistant equipments, such as

brick cutter, brick stacker, mixer, feeder, etc.(press mud brick machinery)

Part one: what's press mud brick machinery?

Press mud brick machinery is suitable for shale, coal gangue, clay and other raw materials to produce

all kinds of hollow brick, standard clay brick. Press mud brick machinery addopts upper and lower structure. 

The upper and lower transmission adopts ZQ type national standard reducer, the axial pneumatic clutch, 

and the whole engine is totally welded by steel plate. The surface of the rimer uses wear-resisting material 

spray welding process to prolong its service time. (press mud brick machinery)

Part two: Press mud brick machinery show

Part Three: Characteristics of press mud brick machinery

1. For doubles shaft mixer blades, we choose 45 Carbon steel.

2. For roller crusher ,we use high manganese

3. Steel axles, gear and other important spare parts which are made by carbon steel and alloy steel through

modulation or quench’s heat treatment procession so as to extend the service life.

4. Compact structure.

5. Strong practicability, small investment, quick effect.(press mud brick machinery)

Part four: Different bricks made by press mud brick machinery

Part five: Press mud brick machinery production line

Press mud brick machinery production line includes box feeder→ Roller crusher/ Jaw crusher→Double shaft 

mixer→ Finess crusher→ Extrudering mixer →Press mud brick machinery→ Brick slitter→ Brick cutter→Brick

Stacker→Kiln Car → Kiln.(Press mud brick machinery)

1. Raw material & fuel preparation and handling

 1)Send clay raw material to box feeder with loader. Send the clay raw material to double-roll crusher for

preliminary crushing .

 2)Preliminary crushed material is conveyed to twin-shaft mixing machine for adding water and agitating

through belt conveyer. 

 3)After mixing of the first working procedure, the raw material is again sent to intense agitation extruder

and high speed fine pulverizing double roll grinder for supplement water and agitating the raw material. 

(press mud brick machinery)

 2. Molding

1)The molding water content rate should be controlled within 16%-18%. 

 2)The vacuum pump will take out the air that entered into the extruding machine together with pug. The

press mud brick machinery will extrude the pug from machine mouth and then, carry out slitting & parting 

according to the required dimension.(press mud brick machinery)

 3. Drying

1)When the unfired bricks cut by cutter and arranged into groups. 

2) The drying chamber work system has heating system, regulating system and moisture excluding system.

The drying quality is controlled by regulating system.(press mud brick machinery)

 4. Burning

1)After drying , the unfired bricks are sent onto  kiln by the dried brick cart,stacking bricks onto the kiln car 

for burning. 

2)unloading system The properly burned bricks.(press mud brick machinery)

Part Six: Main parameter of press mud brick machinery

Part Seven: Installation of press mud brick machinery

1) Press mud brick machinery should be installed in a horizontal concrete, fixed by foundation bolt.

2) Press mud brick machinery's main body should be located vertically with ground.

3) After press mud brick machinery and its assistant equipments being installed, we should check each part, 

each bolt, host storehouse door to see whether ther are tight or not.

4) Confirming the power and control switch according to press mud  and its assistant machine's power.

5) Check finished, we should have a empty load test first. If the test is ok, we can make normal production.

Work site of press mud brick machinery show:

Part Eight: How to choose the most suitable press mud brick machinery?

1) At first, I need to know your raw material. 

2) Second, I need to know the brick size, shape.

3) Third, I need to know how many pieces your will make per hour or per day.

4) Fourth, what/s your bricks' application?(press mud brick machinery)

Delivery site of press mud brick machinery

Visitors came to our factory to test press mud brick machinery

Our service:

Before-sale services:

(1) tell customer how to build new brick factory, including press mud brick machinery, drying and firing.

(Confirm clay, power electricity,water,land area, fund)

(2) Guide customers to choose the best and economic plant, recover the investment within short time.

(3) site inspection.(press mud brick machinery)

In-Sale services:

(1)Quality of press mud brick machinery control must be inspected strictly

(2)In accordance with the agreements stipulated in the contract.(press mud brick machinery)

After-sale services:

(1) We will send the technicians about clay  to guide with device installation, debugging and training operators

until customers are fully satisfied.

(2) Guarantee for press mud brick machinery, materials and equipment supplied under this quotation are valid

for a period of 12 months after commissioning or 16 months after delivery whichever is earlier. Warranty shall 

cover manufacturing defect in material and workmanship but exclude:1. Daily wear and tear 2.mishandling or 

improper operation3. Incoming power supply fluctuation.(press mud brick machinery)

Contact: