Advanced technology high quality full automatic clay brick production line

Specifications

Advanced technology high quality full automatic clay brick production line

Lantian Mechanical Plant brick

Lantian Mechanical Plant was founded in 1980s. It has been a professional full automatic clay brick

production line making plant for over 30 years. Our full automatic clay brick production line includes

automatic feeder, roller crusher, clay brick extruder machine, brick cutter, brick stacker, belt conveyor,

mixer, kiln car, etc. and our engineer also can install the full automatic clay brick production line for

you, and about the kiln, we will guide you to build it.(full automatic clay brick production line)

The whole process of full automatic clay brick production line

Full automatic clay brick production line includes box feeder→ Roller crusher/ Jaw crusher→Double shaft mixer

→Finess crusher→ Extrudering mixer → Full automatic clay brick machine→ Brick slitter→ Brick cutter→Brick 

Stacker→Kiln Car→ Kiln.(full automatic clay brick production line)

1. Raw material & fuel preparation and handling

 1)Send your raw material(stone dust, clay, slag, etc.) to box feeder with loader.  Then through automatic feeder,

raw material being send to roller crusher for preliminary crushing .

 2)Preliminary crushed material is conveyed to double-shaft mixing machine for adding water and agitating

through belt conveyer. 

 3)After mixing of the first working procedure, the raw material is again sent to intense agitation extruder

and high speed fine pulverizing double roll grinder for supplement water and agitating the raw material. 

(full automatic clay brick production line)

 2. Molding

1)The molding water content rate should be controlled within 16%-18%. 

2)The vacuum pump will take out the air that entered into the extruding machine together with pug. The

full automatic clay brick machine will extrude the pug from machine mouth and then, carry out slitting &

parting according to the required dimension.(full automatic clay brick production line)

3 Cutting and placing process

1) Using brick cutter to cut brick log into small bricks.

2) Using brick stacker to place bricks on the kiln car. (full automatic clay brick production line)

4) Drying

1)When the unfired bricks cut by cutter and arranged into groups. 

2) The drying chamber work system has heating system, regulating system and moisture excluding system.

The drying quality is controlled by regulating system. And there are two kinds kilns for your reference: If you 

want to save place, manual power, and want to more automatic, tunnel kiln is a good choice for you; If you

want save money, soil kiln is a good choice.(full automatic clay brick production line)

 5. Burning

1)After drying , the unfired bricks are sent onto  kiln by the dried brick cart,stacking bricks onto the kiln car 

for burning. 

2)unloading system The properly burned bricks.(full automatic clay brick production line)

What's full automatic clay brick production line?

Full automatic clay brick production line is suitable for shale, coal gangue, clay and other raw materials to 

produce all kinds of hollow brick, standard clay brick. Full automatic clay brick production line addopts 

upper and lower structure. The upper and lower transmission adopts ZQ type national standard reducer,

the axial pneumatic clutch, and the whole engine is totally welded by steel plate. The surface of the rimer

uses wear-resisting material spray welding process to prolong its service time. (full automatic clay brick

production line)

Full automatic clay brick production line show

1) Automatic feeder(full automatic clay brick production line)

2) Roller crusher(full automatic clay brick production line)

3) Double-shaft mixer(full automatic clay brick production line)

4) Clay brick machine (full automatic clay brick production line)

5) Brick cutter(full automatic clay brick production line)

6) Brick stacker(full automatic clay brick production line)

Different sizes and shapes bricks made by full automatic clay brick production line

(Our full automatic clay brick production line can produce different shapes and sizes clay bricks

according to customer's demands)

Main parameter of full automatic clay brick production line

Installation of full automatic clay brick production line

1) Full automatic clay brick production line should be installed in a horizontal concrete, fixed by foundation bolt.

2) Full automatic clay brick production line's main body should be located vertically with ground.

3) After all the machines of full automatic clay brick production line being installed, we should check each part, 

each bolt, host storehouse door to see whether ther are tight or not.

4) Confirming the power and control switch according to press mud  and its assistant machine's power.

5) Check finished, we should have a empty load test first. If the test is ok, we can make normal production.

Work site of full automatic clay brick production line show:

 How to choose the most suitable full automatic clay brick production line for you?

1) At first, I need to know your raw material. 

2) Second, I need to know the brick size, shape.

3) Third, I need to know how many pieces your will make per hour or per day.

4) Fourth, what/s your bricks' application?(full automatic clay brick production line)

Delivery site of full automatic clay brick production line

Visitors came to see our full automatic clay brick production line work site

Contact: