Contact Platform Support
Help CenterServo Motor Injection Moulding Machine
Related Products
servo motor injection moulding machine
Product Details:
Item Name: small sized plastic injection molding machine
| Specifications: | |||||
| MODEL | UNIT | ZY-350ST-DM-SS | |||
| Screw Diameter | Mm | 30 | 32 | 35 | |
| Injection Pressure | kg/cm² | 1171 | 996 | 810 | |
| Theoretical Shot Volume | cm³ | 81 | 92 | 117 | |
| Max.Shot Weight(ps) | g | 74 | 84 | 106 | |
| Safe Shot Weight(ps) | OZ | 2.6 | 3 | 3.8 | |
| Max.Shot Weight(ps) | cm³/sec | 62.5 | 71 | 95 | |
| Injection Rate | mm | 115 | |||
| Screw Speed Max. | rpm | 0-190 | |||
| Nozzle Comtact Force | Tons | 4.45 | |||
| Nozzle Retraction Stroke | mm | 190 | |||
| Number of Temperature Control | 3 | ||||
| Clamping Force | Tons | 45 | |||
| Platen Size | mm | 830*400 | |||
| Min.Mold Height | mm | 200/150 | |||
| Opening Stroke | mm | 200 | |||
| Max.Open Daylight | mm | 450/350 | |||
| Ejetor Force | Tons | 1.5 | |||
| Ejetor Stoke | mm | 135 | |||
| Max.Hydaulic Pressure | kg/cm² | 140 | |||
| Pump Output | l/min | 37.2×2 | |||
| Oil Resservoir Capacity | l | 180 | |||
| Cooling Waer Consumption | l/hr | 600-800 | |||
| Pump Motor Power | KW/HP | 5.5/7.5P×2 | |||
| Berrel Heating Power | KW | 2.8×2 | |||
| Total Electricity | KW | 18 | |||
| Machine Weight | Tons | 4.2 | |||
| Machine Dimensions(LxWxH) | m | 2.5*1.9*3.08 | |||
| Shipping Weight | Tons | 4.5 | |||
| Shipping Measurements(LxWxH) | m | 2.6*2*2.3 | |||
Features:
1.Load double-mode aiternnated slide board in CY-DM double-color machine .One slow die and two upper dies are loaded in the machine .Alternate the dies from left to right at the same flat surface.After the completing of one color,do not take out the products but change the slide board to the second color to efficiency can be advanced in a large range.The finished goods are propped up to outside for completion.
2.Two single machines can be operated independently.Two machines can be also connected to operate.
3.When use single machine ,thimble is built in.
4.Phase 5 of screw single machine controls temperature.
5.Material tube can be lifted .It is easy to clean stub bar .It is easy to fix die.
6.Low-pressure closed die assembly can protect the safety of die.
Samples produced:
Send Inquiry to This Supplier
You May Also Like
-
50T Plastic Injection Molding Machine SupplierUS$ 11,800 - 11,800MOQ: 1 Set
-
FHP Drive,Power Transmission PartsNegotiableMOQ: 1
-
Hydraulic CutterUS$ 1 - 10,000MOQ: 1 Piece
-
China Supplier Plastic Injection Molding MachineUS$ 8,999 - 19,999MOQ: 1 Set
-
2 Line Combing Drawing Sisal MachineUS$ 1 - 9MOQ: 1 Unit
-
Transmission Large Gear Customized in ChinaUS$ 1,500 - 6,000MOQ: 1 Metric Ton
-
Automatic Spraying Paint MachineUS$ 54,000 - 76,300MOQ: 1 Set
-
Mixing Machine of Wood Pallet MakingUS$ 6,000 - 13,800MOQ: 1 Set
-
Wrapping MachineryNegotiableMOQ: 1 Set
-
PET Strapping MachineUS$ 520 - 1,190MOQ: 1 Set
