Contact Platform Support
Help CenterCabinet Dryer for Plastic Injection Molding Machinery
Related Products
-
Water-Cooled Type and New Condition Recirculating ChillerUS$ 1,000 - 5,000MOQ: 1 Piece -
Factory Directly Sale Box Type Water Chiller SystemUS$ 1,000 - 5,000MOQ: 1 Piece
-
Water Cool Industrial Water ChillerUS$ 1,000 - 5,000MOQ: 1 Piece
-
Industrial Opening Type Screw Water ChillerUS$ 100 - 5,000MOQ: 1 Piece
-
6kw Water Cooled Screw Chiller PriceUS$ 100 - 5,000MOQ: 1 Piece
Cabinet Dryer for Plastic Injection Molding Machinery
| Raw Material | Humidity (℃) | Time(HR) |
TCD200
|
| ABS | 80 | 2-3 | 126 |
| Ionomer(SURLYN) | 50 | 3-4 | 109 |
| LCP | 150 | 3-4 | 67 |
| PA6.6/6.10/6.12 | 80 | 4-5 | 77 |
| PA 11/12 | 80 | 4-5 | 61 |
| PBT | 140 | 3-4 | 62 |
| PC | 120 | 3 | 97 |
| PC+ABS | 100 | 3-4 | 103 |
| PEEK | 150 | 3 | 90 |
PEI |
150 | 3-4 | 95 |
| PES | 160 | 4 | 77 |
| PET | 160 | 4-6 | 99 |
| PETG | 66 | 4-5 | 105 |
| PI | 120 | 2 | 105 |
| PMMA | 80 | 3 | 10 |
| POM | 100 | 2 | 198 |
| PPO | 110 | 2 | 93 |
| PPS | 140 | 3-4 | 93 |
| PUS | 120 | 3-4 | 109 |
| PU | 90 | 3-4 | 78 |
| TPU | 90 | 2-3 | 97 |
Specification :
| Model | TCD-200 | |
| Air volume | M3/H | 200 |
| Drying the windmill | 50HZ kw | 2.2 |
| 60HZ kw | 2.55 | |
| Regeneration Of the windmill | 50HZ kw | 0.4 |
| 60HZ kw | 0.5 | |
| Electrothermal Regeneration | kw | 5.4 |
| Pipe Diameter | inch | 2.5 |
| The regeneration air outlet | inch | 2 |
| Cooling water | Inch | 3/4 |
| LPM | 30 | |
| kg/cm2 | 1.0-1.5kg/2 above | |
| Maximum Power | 50HZ | 8 |
| 60HZ | 8.45 | |
| Size mm | W | 630 |
| D | 830 | |
| H | 1560 | |
| Abiut the weight | kg | 245 |
Features:
1.Honeycomb-style washable ceramic rotating wheel is used, which
can run in long term without producing any powdered scrap, so as to
maintain cleanliness of raw material, avoid any possible contamination
and ensure quality of the product.
2. When the machine runs under load continuously, the dew point can remain at -32~-40℃, and even -40℃ when matched with chilled water, and the dew point curve remains steady instead of fluctuating.
3. The smart microcomputer LED panel can display various operation states automatically, and is easy to operate and has full range of functions.
4. The embedded dry and regeneration air filter is easy to clean.
5.The cooler is made of stainless steel and easy to disassemble. The
cleaning will be easier when oil-bearing plastic is to be dried.
6. It has protective devices for lack-phase, reverse phase, abnormal
operation, motor overloading and regeneration over-temperature.
Send Inquiry to This Supplier
You May Also Like
-
Hopper Dryer for Plastic Industry for Injection Molding MachineUS$ 1,000 - 2,000MOQ: 1 Set
-
Plastic Dryer /Plastic Drying Machine / Plastic Centrifugal DryerUS$ 1,599 - 2,599MOQ: 1 Set
-
Long Time Guarteen Time Hydraulic Dehydrator Machine in ChinaNegotiableMOQ: 1 Set
-
Plastic Dry Machine/plastic Material Drying Machine/plastic Pellet DryerNegotiableMOQ: 1 Set
-
Stainless Steel Vertical Dewatering Centrifuge for Plastic Scrap ProcessingNegotiableMOQ: 1 Set
-
Industrial Mold Dehumidifier Mold Dryer Machine PriceNegotiableMOQ: 1 Set
-
Hopper DryerUS$ 500 - 10,000MOQ: 1 Set
-
Plastic Dryer MachineUS$ 100 - 8,000MOQ: 1 Set
-
PET PVC HDPE LDPE PE Plastic Vertical Drying Drier MachineUS$ 200 - 3,300MOQ: 1 Set
-
Plastic Film Vertical Dewater for Sale in UAE.US$ 1,000 - 1,300MOQ: 1 Set
