Manufacturer supply outdoor 33kv isolators disconnector switch GW4

GW -12(40.5) Outdoor HV Disconnect Switch
Structure feature
GW4-12(40.5)outdoor HV disconnect switch
GW4-12(40.5)outdoor AC high voltage disconnect switch 
(disconnect switch for short) is used to open and close circuit with 
voltage but no-load 50/60Hz,12(40.5)kV power system. It accords 
with standards of IEC129-1984 AC
Disconnect Switch and Earthing Switch and GB1985 and other 
relative standards.
This disconnect switch consists of pedestal, insulating brace, 
electric material and operating mechanism. 
There are two braces on each pole, and electric blade is installed 
on the top of each brace and the connection point of the two blades 
is between the two braces. With the driving of operating mechanism
the two blades can rotate horizontally ninety degrees to close. 
We can connect three single-pole disconnect switches into a 
linkage three-pole switch through interlink rod. 
This disconnect switch can be matched with CS11 type or CS17 
type manual mechanism, thereinto, CS17 be used in disconnect 
switch with earthing fitting. (motor mechanism can be installed 
according to user's requirement), Reasonable structure, 
flexible operating; 
convenien t installation, able to use single-pole or three-pole; 
wide distance of contact, safe and reliable insulating. 
The earthing type is flexible according to user's requirement, 
single earthing dual earthing or without earthing can be chosen.

outdoor 33kv isolators switch