Johnson screen manufacture

  Johnson wellscreen shall be manufactured by spirally winding wedge shaped stainless steel wire over a frame of straight stainless steel wires parallel to the axis of the screen.The wedge wire shall be securely welded on the frame and fusion welded at every intersection.The ends of the frames shall be securely welded on the inner ends of each coupling adapter.
Nominal diameter and standard length of the screen
Open area of the screen (percent) and slot size
Collapse strength of the screen
Tensile strength of the screen
Details of the coupling connection including thread measurement
Number and size of supporting rod and shape and size of wedge wire
Stainless steel accoring to ASTM standard
All materials shall be new and of the specified standard
Submit certified copy of pre-shipment inspection done by the world recognized inspection and factory test report signed by chief inspector of the manufacturer.
Eliminate all possible damage to the materials during transit and handing with special care to screen sections and threaded portion of the materials.Thread protecting cap must be provided for protecting threaded of each screen

Well   Screen

Specification (Profile wire):

Width(mm): 1.50 1.80 2.30 3.00 3.30 3.70
Height(mm): 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00

Specification (support rods):

Width(mm): 2.30 3.00 3.30 3.70
Height(mm): 2.70 3.60 4.70 5.60 6.30
Round: From 2.50mm to 6.5mm

Note: other wires and rods available upon request

Slot size

0.10, 0.15, 0.20, 0.25, 0.30…… 6.00mm also achieved upon request.

Material:

Low carton, low carton galvanized steel (LCG), stainless steel (304,316 etc.)

Length

2.9 meters,3 meters,5.8 meters,6 meters.

Diameter

1 1/2",2",2 1/2",3",3 1/2",4",6",7",8",9 5/8",10",12",133/8",14",16"

Screen end

Plain beveled ends for butt welding or threaded

Other sizes available on request .Deep well construction specifications available on question.

Well depths :100 m, 200 m, 350 m & 600 m.

Advantage

Reduce energy consumption and increase water flow.

Reduce erosion of entry surfaces and increase well life.

Allow a uniform and efficient well development.

Reduce significantly potential pump damage and subsequent maintenance costs.