PSA Oxygen Generator for industrial

Summaries

 Oxygen generating system is mainly composed of air compressor, air cooler, air cushion tank, switch valve, the adsorber and the oxygen tank. Raw material air after suction filter to remove dust particles, air compressor pressure to 3 ~ 4barg and into one of the adsorber. Adsorber fill the adsorbent, including moisture, carbon dioxide, and small amounts of other gas composition at the entrance of adsorber by loading in the bottom of the activated alumina adsorption, the upper part of the nitrogen is then loaded on the activated alumina adsorption by zeolite molecular sieve. Oxygen (including argon) for the adsorption component from the top of the adsorber exit as product gas tank to the oxygen balance. When the adsorber adsorption to a certain extent, the adsorbent will reach saturated state, this time by switching valve vent, has the adsorption of moisture, carbon dioxide, nitrogen, and a few other gas composition to the atmosphere, adsorbent regeneration. Use molecular sieve (a synthetic zeolite), which attracts(adsorbs)nitrogen from air at high pressure and releases(desorbs)it at low pressure to generate 93%±2 pure oxygen.

 Working Process

  Features

      1,Material is air, it need not any other auxiliary material, low power, low cost.
2,Low working pressure keep it is high reliability,high performance and high  safety.
3,Adjustable oxygen flow, big oxygen production, low noise.
4,Easy to operate,product at any moment, continue to supply oxygen.

  Packing

 FAQ