A new double scoop 300 * 400 diaphragm gold separator jig machine

  jig machine introduction:
Double bucket diaphragm jig is divided into left type machine and right type jig face two kinds of model.The sieve jig is

fixed.Suitable for metal ore, such as tungsten, gold placer, selection of tin ore, etc., can be used for both selected fine grained materials, can also be used to choose raw materials, to the largest size for 6 to 8 mm, but in the sands of individual cases, the biggest size is 12 mm.
The diaphragm jig working principle:
Double hopper consists of: diaphragm jig structure fuselage, transmission device, water segregator, diaphragm and the lid of the main parts such as the body has two jump machine, the size of each bucket diaphragm with no bottom plate will be divided into jig area and diaphragm area two parts.Jigging process is to rely on the rubber diaphragm for up and down reciprocating movement caused by the medium (water) impulse.Motor through v-belt drive large leather wheel rotation, the eccentric shaft connecting rod moves up and down, rocker arm, which is connected with the connecting rod moves up and down, the rocker on two connecting rod connecting rubber diaphragm, diaphragm to get up and down reciprocating motion, carries on the jig.
According to be processed ore granularity, can change at time of connecting rod and selecting different stroke, in order to get the best effect of jig.Change speed method is to replace the small pulley, can have two kinds of speed: 322 times/min;420 times/min.Choose stroke methods to loosen the set screw and nut, pull the positioning pin, rotating eccentric adjusting sleeve and the relative position between the eccentric shaft, can have 11 different stroke (0-25.3 mm).
Work due to the top of the screen with a sieve, so the jig can be used to deal with uneven grain size of material.(note: this screen according to the order don't supply) in ore was sent into jigging chamber, due to the effect of agitating of the diaphragm, the particles in the medium according to the proportion of layers;Fine, heavy mineral grains by artificial bed particle clearance and mesh, heavy set in jigging store in the mine, the upper rough and light particles (mineral) is medium flow to sieve at the end of the row ore mouth, because after the jigging chamber is lower than the location of the jigging chamber 50 mm, so the light particles after former room transom overflow into the room, again by the jig.The position can be adjusted according to need the tail plate height, to control the size of the ore.
In the storage hopper concentrate by row ore discharge pipe on a regular basis.

Kunming Hengxing Beneficiation Equipment Manufacture Co., Ltd is a professional manufacturer of crusher, ball mill, flotation machine, magnetic separator and other processing equipment, priced supply of gold ore processing equipment, lead-zinc ore processing equipment, copper processing equipment, iron ore beneficiation equipment, etc. sets of processing equipment, Yunnan is one of the largest sets of processing equipment manufacturer specializing in the production of Nissan 20 tons -500 tons of mineral processing equipment manufacturers and provide related services to large professional firms. The company has the most outstanding professional and technical personnel, strong technical force, complete equipment, perfect detection means, not only to provide you with a high level of production equipment, but also to complete a comprehensive program to provide you with addresses exploration, mining, milling, smelting , production line design, installation, technical guidance, training and other comprehensive services. 

    Our Company continues to increase investment in new product development, to ensure that the highest quality of these new products may be available to you, and to always adhere to

“The agressive principle of quality technology development which is our business philosophy goal”.

Exporting standard, bulk cargo,container,

1,Based on the scene design whole equipment layout, construction bases layout equipment installation drawings and other technical data.Our company will assist you in the installation and machinery set up

2,When customer is making basic construction the company or organizes production according to contract.
3,Inspection before delivery, delivery organization and customer take-over.

4, We will do our best to serve each and every customer. Your satisfaction is our honor If you have any questions or concerns about this item, please contact us through Alibaba link , we will assist you in eveything within our limits and we are woring hard to answer all emails within 12-24  hours.  

Tel:0086-0871-68303240            Phone:0086 13888518686

1.Q:Where is your company located? How can I visit there?
A:Our company is located in Kunming City, Yunnan Province, China. All our clients, from home or abroad,
are warmly welcomed to visit us, Before you visit our company, we can connect by phone !

2.Q:What is the material of your products?
A: The main material is steel. We can also choose material as customers’ requirement.

3.Q:How can I get some information about your machine?
A: We are honored to offer you our brochure by email, including the exact information about our product.

4.Q:How does your factory do regarding quality control?
A:"Quality is priority. Hengxing people always attach great importance to quality controlling from the very beginning to the very end.