Aerial Cable Accessories for 12/24/48 Core ADSS Cable Insulation Suspension Clamp

Specifications

1.ADSS cable insulation suspension clamp
2.Well corrosion resistance
3.Protect cable from wear
4.Convenient installation

Aerial Cable Accessories for  12/24/48 Core ADSS Cable Insulation Suspension Clamp  

 

 

 

 

ADSS Tension Clamp: 

 

Product Introduction:

The tension clamp is intended for turning angle, continuing and terminal connecting. The helical aluminum-clad steel rod has strong tensile strength, no concentrative stress, plays a role to protect cable and assist reducing vibration. The whole set of cable tension hardware contains preformed rod, matching connection hardware. The holding strength of clamp is no less than 95% of rated tensile strength, quick and easy to install, cut construction cost, suitable for a span<100m.

 

Functions:

The hardware is mainly intended to bear axial tension, and uniformly distribute radial stress, to ensure safe and reliable holding strength offered on the premise of not damaging cable (mostly used in turning angle, continued pole and terminal pole)

 

Parameters:

Configure model by cable diameter, RTS and span

 

 

ADSS Tension Clamp:

 

Product Instruction:

The tension clamp is intended for turning angle, continuing and terminal connecting. Helical aluminum clad steel rod has strong tensile strength, no concentrated stress, plays a role to protect cable and assist reducing vibration. The whole set of cable tension hardware contains: structural reinforcing rod, outer preformed rod (dead end), matching connection hardware. Clamp’s holding strength is no less than 95% of cable rated tensile strength, easy and quick to install, cut construction cost, suitable for a span>400m.

Function:

The hardware is mainly intended to bear axial tension, uniformly distribute radial stress, to ensure safe and reliable holding strength offered on the premise of not damaging cable (mostly used in turning angle, continued pole and terminal pole)

Parameter:

Configure model by cable diameter, RTS and span

 ADSS Tangent Suspension Clamp:

 

 

Product Instruction:

The tangent suspension clamp for ADSS is intended to connect ADSS cable on straight-line poles. With no concentrated stress and avoiding a bending-stress, the clamp may play a role to protect cable and assist reducing vibration. The whole set of suspension clamp contains: suspension clamp, matching connection hardware. Clamp’s holding strength of is over cable rated tensile strength for 10-20%, easy to install.

Function:

Intended for straight-line pole that span is less than 100m in ADSS erecting, one pole for one set

 

Parameter:

Configure model by cable diameter and span

 

 

ADSS Double Suspension Clamp:

Product Instruction:

ADSS double suspension clamp, adopting double-layer design, is consisted of structural reinforcing rod/outer preformed rod (dead end) in proper size and length, intended to pass axial load and disperse radial stress, to reach its inner reinforcing units through plastic jacket, so as not to impair the plastic jacket or inner optical fiber that is fragile and vulnerable. Clamp has excellent anti-fatigue, including outer preformed rod (dead end)/structural reinforcing rod, two sets of suspension clamp, and matching connection hardware.

 

Function:

Intended for straight-line pole with a big height-difference and a span over 800m, one pole for one set

 

Parameter:

Configure model by cable diameter and span.

 

  

Size	Cable (mm)	Holding (KN)	Span (m)	Outer Layer Length(mm)	Inner Layer Length(mm)	Wgt(kg)	Accessories
							Cleves	Thimble	U-ring
NL-0940/ADSS20	8.6-9.4	20	200/300	800	1100	0.88	ZH-7	T C 04	U-7
NL-1140/ADSS20	10.8-11.4	20	200/300	800	1100	1.08	ZH-7	T C 04	U-7
NL-1550/ADSS20	14.7-15.5	20	200/300	800	1100	1.60	ZH-7	T C 07	U-7
NL-0940/ADSS30	8.6-9.4	30	300/400	1100	1400	1.17	ZH-7	T C 07	U-7
NL-1010/ADSS30	9.5-10.1	30	300/400	1100	1400	1.35	ZH-7	T C 07	U-7
NL-1220/ADSS40	11.5-12.2	40	400/500	1260	1800	2.14	PD-7	T C 07	U-7/2
NL-1370/ADSS40	13.0-13.7	40	400/500	1260	1800	2.44	PD-7	T C 07	U-7/2
NL-1550/ADSS60	14.7-15.5	60	600/700/800	1560	2200	3.11	PD-7	T C 07	U-7/2
NL-1460/ADSS60	13.8-14.6	70	700/800/900	1600	2400	3.20	PD-7	T C 07	U-7/2
NL-1550/ADSS70	14.7-15.5	70	700/800/900	1600	2400	3.27	PD-7	T C 07	U-7/2
NL-1650/ADSS100	15.6-16.5	100	1000	2800	4000	7.02	PD-10	T C 10	U-10/2
NL-1750/ADSS100	16.6-17.5	100	1000	2800	4000	7.22	PD-10	T C 10	U-10/2
NL-1870/ADSS100	17.6-18.7	100	1000	2800	4000	7.91	PD-10	T C 1	U-10/2

 

Remarks: N – dead-end clamp; L – spiral stranding wire; number – product code; ADSS: cable code

 

 

 

 

Welcome to visit our factory !!!

 

 

Any details or requirements please don't hesitate to contact us .