super thin inox cut off wheel for portable machine

Specifications

White aluminum oxide,
Sharp,give clean cut,
High strength add safety,
Donot fire workpiece surface
Cutting inox,alloy steel

Factory Advantages

1.Near to raw materials region,low labor costs,so lower production cost,competitive price,

2.Locate in the center of China,low and almost same transport costs to any China main port,

3.Advanced technique,

4.More than 10 years production experience,

5.Strict quality testing,good after-sale service,

6.ISO9001:2000 certificate,

7.Abundant export experience,

8.Accept OEM brand 

9.Small order is accepted,

10.Free samples to test quality. 

Raw Materials

High hardness abrasive:ensure cutting sharp sex

High quality adhesive resin:ensure good durable performance

Powder phenolic resin:Good technological efficiency,a smaller forming density,greater abrasives structure.

High quality reinforced net:ensure the product use security

Product:

Size(mm)	Size(inch)	Shape	Description(WA60#TBF)	Colour	Speed(r.p.m)	Speed(m/s)
100x2.0x16	4x5/64x5/8	flat	1.Material:Aluminium oxide/WA 2.Grit size:60#, 3.Hardness(1):T 4.Bonding agent:resin 5.Reinforced net:Two fiberglass nets	Black	15200	80

(1)Generally,please chose reasonable hardness cutting wheel to reduce its attrition wear.These factors can affect the cutting wheel hardness:The amount of resin bond to join,Forming density of abrasive,Sintering temperature and sintering temperature etc.

Application:

It is used by aerospace,plant maintenance,foundry,automotive,metal,fabrication and shipyards

ideally used for cutting all kind of metal and steel,for example ferrous metal,nonferrous metal,mild steel,alloy steel,stainless steel,cast steel,high tensile steel,steel tubes,steel pipe,steel bar,angle iron,cast iron etc

Feature:

1.Especially WA made for professional requestion of cutting inox,stainless steel,

2.Imported resin bonded makes our wheel stronger,

3.Both sides with reinforced fiberglass nets,strengthen,very good safety,

4.Best cutting performance with very fast cutting,

5.Grain edges are sharp,clean cutting action,

6.Excellent capacity of heat-transmission,do not burn workpiece,

7.In good balance,comfortable hand-feeling,

8.Only little dust and noise production,

9.Lowest power consumption,high durability.

Domestic leading molding equipment:ensure the stability of the product performance

Performance testing site:

Cutting result 

Size	Cutting Object	Cutoff Quantity	Efficiency SEC/cutoff	After Cutting Surplus
Φ230×3.0mm	5×5×0.3cm angle iron	10	10	Φ220mm
Φ250×2.0mm	5×5×0.3cm angle iron	20	15	Φ245mm
Φ300×2.5mm	5×5×0.3cm angle iron	20	9	Φ283mm
Φ350×2.5mm	5×5×0.3cm angle iron	20	7	Φ336mm

Cautions:

1.Do visually inspect all wheel before mounting for possible damage.

2.Do make sure operating speed of machine, does not exceed speed marked on wheel,its blotter or container.

3.Do check mounting flanges for equal size,relieved as required and correct diameter. 

4.Do be make sure work rest is properly adjusted on bench,pedestal and floor stand grinder.

5.Do always use safety guard that covers a mimimum of one-half the abrasive wheel.

6.Do allow newly mounted wheel to turn at operating speed,with guard in place,for at least one minute beforerinding.

7.Do ture off coolant before stopping wheel to avoid creating an out-of-balance condition. 

Safety Recommendatio

1.Wear protective goggles;

2.Wear protective gloves;
3.Wear ear protectors;
4.Wear dust respirators;
5.Observe safety recommendations.

Packing:

1.During transport,please load and unload carufully to prevent the crack and shock.Ensure packing without damage.

2.During storage,put the discs horizontally,donot touch the floor directly. 

3.Should prevent moisture and direct sunlight,keep the warehouse shady and ventilated.The warehouse's temperature can not be less than 5 degrees 

Dimension mm	Dimension inch	Speed r.p.m	Speed m/s	G.Weight kg	Dimension L*W*H(mm)	Packing pcs/carton
100x2.0x16	4x5/64x5/8	15200	80	23	440x230x215	600
115x2.0x22.2	41/2x5/64x7/8	13300	80	20	260x260x275	400
125x2.0x22.2	5x5/64x7/8	12200	80	19	410x280x155	300
150x2.0x22.2	6x5/64x7/8	10200	80	27	485x330x155	300
180x2.0x22.2	7x5/64x7/8	8500	80	26	390x390x155	200
200x2.0x22.2	9x5/64x7/8	7600	80	17	440x230x150	100