Kafuter K-303 UV Adhesive/Acrylic UV Glue for PVC/ABS/PC/Acrylic

Specifications

Acrylic UV Glue
1.one part,flexible liquid
2.bond plastics PC/PVC/ABS/Acrylic
3.50ml/bottle

  

Kafuter K-303 UV Adhesive /UV Light Adhesive/UV Curing Adhesive/UV Glue 

 

                            (for Platics PC/PMMA/PVC/ABS/PS Bonding )                                                 

 Characteristics:

  K-303 is a low viscosity, uv curing modified acrylic adhesive which can be cure by expose to UV/Visible light of sufficient intensity. Low viscosity, high bonding strength, and form a great flexible layer after cured. Using in hard-to-bond plastics bonding, like PC, PMMA, PVC, ABS, PS, etc. also, can bond acrylic substrates, and plastics to metal, plastics to glass. 

 

Application: 

(1) Glue for PMMA, metal, and PMMA to metal bonding. 

(2) Bond the ACRYLIC substrates, such as acrylic billboard, acrylic artifacts, etc.

(3) also, suitable for transparent plastics bonding, like PC, PVC, ABS, PS, and other substrates in plastics boxes, plastics artifacts, etc.

 

 Typical Properties:

Test Item	UV Adhesive K-303
Viscosity	550±100
Appearance	colorless or transparent liquid
Set Time(s)	6s 125w Phillips high fluorescent lamp
Harness(Shore A)	53
Shear Strength(PS/PS)	4~5 mpa, 30°c

 

User's guide: 

Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-303 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.

 

 

Notes: 

1.This product is light sensitive, exposure to daylight, UV light and artifical lighting should be kept to a minimun during storage and handling.

2.For best peformance bond surfaces should be clean and free from grease.

3. cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrates through which tha radiation must pass.

 

Packing Specifications:

10ml/bottle	10bottle/box	100bottle/case
50ml/bottle	10bottle/box	80bottle/case
250ml/bottle	10bottle/box	40bottle/case