Shenzhen Kafuter K-300 Adhesive Tape Rewinding Machine

Specifications

adhesive tape rewinding machine
1.one part,flexible liquid
2.for big area of glass/cystal bonding
3.cure under UV/V Lamp
4.2

    Shenzhen Kafuter K-300 Adhesive Tape Rewinding Machine

 Characteristics:

UV light curing adhesive is one-part, Shenzhen Kafuter K-300 Adhesive Tape Rewinding Machine Shenzhen Kafuter K-300 Adhesive Tape Rewinding Machine modified acrylic adhesive which can exposed to  UV  light or visible light

 

Features: high transparency and bonding strength, low odor and viscosity, good deaeration, suitable for big area glass or crystal bonding

 

Application:  Using in big area glass or crystal bonding. Like bonding in glass doors, glass artifacts, crystal artifacts, etc.

 

Typical Properties:

Test Item	UV Adhesive K-300
Viscosity	<110mpa.s
Appearance	colorless or pale yellow liquid
Set Time(s)	10s/4mW/cm²UVA
Cure Time(s)	180s/4mW/cm²UVA
Shear Strength(mpa)	glass/stinless steel≥10

 

User's guide: 

Kafuter uv light adhesive is recommended for big area glass or crystal bonding .uv adhesive K-300 can be cured by exposure to UV/Visible light of sufficent intensity. surface cure is enhanced by exposure to uv light in the 200 to 260 nm range. cure rate and ultimate depth of cure depend on light intensity,spectral distribution of the light source, exposure time and light transmittane of the substrate through which the light must pass.

 

 

Notes: 

1.This product is light sensitive, exposure to daylight, UV light and artifical lighting should be kept to a minimun during storage and handling.

2.For best peformance bond surfaces should be clean and free from grease.

3. cure rate is dependent on lamp intensity, distance from light source, depth of cure needed or bondline gap and light transmittance of the substrates through which tha radiation must pass.

 

Packing Specifications:

250ml/bottle

10bottle/box

40bottle/case