JL-1 corrugated carton box single facer,vacuum caodboard single facer machine

corrugated carton box single facer,vacuum caodboard single facer machine

Technological Parameter:

*Effective working width: maximum 1600mm   minimum 900mm

*Max machine speed: 120m/min      Economy speed: 80-100m/min

*Working pressure: 0.6-0.9Mpa   Steam pressure: 0.9-1.3Mpa

*Steam consumption: 0.5-0.8t/h

Working power: 380v   50Hz

*Dimension: 3600mm×2100mm×2100mm(length×width×height)

Equipment Characteristics:

1. Adopt adsorption in order to transmit cardboard and keep corrugated stably.

Corrugated paper are adsorbed into corrugated roller through vacuum box by fans and come into negative pressure zone to finish corrugated.

1. The width of low corrugated roller suction groove no more than 2mm, can reduce corrugated cardboard stripe marks of single facer.
2. Cardan transmission, separating with vibration source, drive more stably, running reliable, simple maintenance.
3. Reduction box adopts oil lubrication, close style gear transmission, reduce the machine vibration.
4. Adopt auto-cycle supplying glue, pneumatic gluing and resetting with buffered effect.
5. Glue roller surface be special anilox engraved and chrome plating.
6. Upper and lower corrugated roller are made of 48CrMo high quality alloy steel, after heat-treatment. The rigidity is HRC56-60°,the surface are whetted and chrome plating.

Flute type: A flute height is4.7mm  B flute height is2.75mm   C flute height is3.75mm  E flute  height is1.8mm(or customers appointed)

Main Components Parameter:

1. Upper and lower corrugated roller are made of 48CrMo high quality alloy steel, after heat-treatment. The rigidity is HRC56-60°,the surface are whetted and planting chorme.

2. Diameter of upper corrugated roller:φ318mm

Diameter of low corrugated roller:φ320mm     Origin: HEBEI

3..Diameter of pressure roller:φ 340mm

Pressure roller are made of No.45 seamless steel pipe that are treated by quenching.

4.Diameter of gluing roller:φ 240mm

Surface are treated with special anilox embossing and chrome plated.

5. No.45 Seamless steel pipe made in CHENGDU

6. Diameter of picking glue roller:φ 120mm

No.20 seamless steel pipe made in CHENGDU

7. Diameter of preheating roller:φ400mm    20g steel made in JINAN Iron and steel company    wall thickness: 20mm

Material and Purchase Standard Items:

1. The material of both sides wallboard and base material: HT200 casting made in HEBEI
2. Material of transmission department base: It is weld with channel steel
3. Rotary Joint, Metal hose, made in Johnson, SHANDONGLUGUANQIU
4. Bearing types: (main)made in JAPAN NSK

(General)made in WAFANGDIAN, HARBIN, LUOYANG

5. General bearing made in HAERBIN,WAFANGDIAND,LUOYANG

Bearing with block, made in ZHEJIANG JINRUN

6. Motor types: Main motor,11kw  one set     continuous work

Suction fan7.5kw   one set     continuous work

7. Electric types made in ZHEJIANG ZHEGNTAI

8. Pneumatic components: TIANYUAN     Origin: SHANDONG ZAOZHUANG