high voltage led strip light kit 220V SMD 5050 IP65 waterproof strip light

high voltage led strip light kit 220V SMD 5050 IP65 waterproof strip light

Detail:

Features: 

1. Can be run in 220V or 110V without extra adaptor or power source.
2. Can be max run 100 meter and also be cut or connected in every meter.
3. PVC tube provides good waterproof and can be used both indoor & outdoor.
4. 3528 & 5050 LED provide greater brightness compared to 3mm LED used in rope light.
5. Solid-state for high vibration resistance and good flexibility for any shape.
6. Independent LED, one led broken will not affect next leds (3538 double row and 5050).

Installation Diagram:

1.Install:Take out the package,make sure it comes with necessary accessories,which should include:fixing clips,middle plugs,end caps,head wires.fix the strips with clips onto where you need,put the wire into sockets to light the strips.

2.Cut: Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end with end caps,seal with enough glue to make sure it is still waterproof.

3.Connect: Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue.

Application:

1) Architectural decorative lighting 
2) Archway, canopy and bridge edge lighting 
3) Amusement park, theater and aircraft cabin mood lighting 
4) Emergency hallway lighting 
5) Auditorium walkway lighting 
6) Stairway accent lighting 
7) Concealed lighting 
8) Backlighting for signage letters 
9) Channel letter lighting 
10) Emergency exit path lighting 
11) Cove lighting

Certification:

Thank you for scaning our high quality products,your feedback are highly appreciated,looking forward to received your inquiry, thanks again.