ES-P01C Mini floodlight motion sensor with waterproof IP65

FUNCTION

 ØCan identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted on the “sun” position (max). It can work in the ambient light less than 3LUX when it is adjusted on the “moon” position (min). As for the adjustment pattern, please refer to the testing pattern. 

    ØSENS adjustable: It can be adjusted according to using location; low sensitivity with 2m for detection distance; high sensitivity with10m, it fits for large room.

    ØTime-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).

    ØTime-delay adjustment: It can be set according to the consumer’s desire. The minimum time is 10sec±3sec. The maximum is 8min±2min.

INSTALLATION:

• • Ø Switch off the power.
  • Ø Screw off the nail on the front cover. Open the wire hole. The power wire and the load wire are bored in the bottom.
  • Ø Fix the bottom on the selected position with the inflated screw.
  • Ø Connect the power and the load with the connection-wire column according to the connect-wire figure as following part.
  • Ø Fix the front cover of sensor, please screw the nail and switch on the power. So you can test it.

Detail Picture of : ES-P01C Slim LED floodlight motion sensor !