ES-P04A 220V infrared motion sensor switch with waterproof IP44

Specifications

1.Detection Range: 220 degree 
2.Power Source :110-130V/AC 220-240V/AC 
3.Time Delay :10sec-10min 
5.waterproof:IP44 

FUNCTION:

• Can identify day and night automatically: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way.
• Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).
• Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec±3sec and the maximum is 7min±2min.

TEST:

• Turn the TIME knob clockwise on the minimum, turn the LUX knob anti-clockwise on the maximum (sun).
• When you switch on the power, the controlled load and pilot lamp are both not working. Preheat 30 seconds later, the load and the pilot lamp are turned on synchronization, in the absence of no inductor signals, the load should be stopped working within 5-30sec, the pilot lamp is turned off.
• After the first is out, make it sense again after 5~10sec. The load should work. When there is no inductor signals in the pilot lamp, the load should be stopped working within 5-15sec.
• Turn LUX knob clockwise on the minimum. The inductor load should not work after load stop working. If you cover the detection window with the opaque objects (towel etc), the load work .under no induction signal condition, the load should stop working within 5-15sec.