Firing Brick Kiln Car for Tunnel Kiln

Specifications

1.Reliable quality
2.Whole steel
3.Long worklife
4.Reasonable design

Tunnel kiln Instroductions:

1.Tunnel kiln is used for firing unburned bricks. 

2.The kiln car loads the adobes from workshop to tunnel kiln

3.The draft fan blow heat wind into the kiln to dry the adobe

4.After drying and sintering,the kiln car convey the end products out of kiln

Process:

1)The adobe out from the vacuum brick machine,through the divide adobe machine to transport to the kiln car.

2)The kiln car on the rail to reach the kiln gate.

3)The pusher car pushing the kiln car to the preheating zone,then with the help of ferry car to arrive at the high roasting zone.

4)At last, The kiln car come out of the tunnel kiln on the rail to reach the finished products Zone.

Service policy:       

1. before sales:

   1>the device type

   2>for customer training and technical personnel

   3>According to customer request, design and manufacture products

   4>the company sent engineering and technical personnel to the user scene, planning for the optimal design of the flow field, and the solutions.

 2. Medium-sales:

   1> Acceptance of the product

   2> Assist client protocol construction scheme

 3. After-sales:

   1> On-site training personnel

   2> Appoint special after-sale service staff, arrived at the scene guide clients installation and commissioning.

 

 Main kiln operating machines:

1.Kiln car

2.Ferry car

3.Pusher Car

4.Fan coil unit