Contact Platform Support
Help CenterPlastic Machinery
Related Products
-
Injection Molding Machine With Variable Pump Control SystemEUR 50,000 - 55,000MOQ: 1 Unit -
Variable Pump Injection Molding MachineNegotiableMOQ: 1 Set
-
Presion Plastic Injection MachineNegotiableMOQ: 1 Set
-
Energy-saving Injection MachineNegotiableMOQ: 1 Set
-
Special Use Injection Machine for PA66 Cable TiesNegotiableMOQ: 1 Set
Specifications
GS Variable pump series can be able to save 30%-50% electric power consumption base on fixed Pump seriesPlastic Machine
GS variable pump drive injection molding machine is precision and energy-saving series by GS Machinery, assumers perfect combination of GS state-of-the-art machine processing together with internationally advanced variable pump control technology.
This type of injection molding machine adopt high responsive proportional variable pump system thus to enable the high mach of power between hydraulic output and machine effective operation which avoids energy loss from high pressure throttle flow. Compared with normal constant pump drive machine, the variable pump drive machine is able to save electric power consumption by 30% up to 50%.
In addition, the machine less heating enables save of cooling water by 30%, debasing peripheral noise and extension of service life of hydraulic sealing parts and oil to minimize operation and maintenance cost and meanwhile to meet the strict international environment protective policy.
GuangSu GSV Series variable pump drive injection molding machine is sure to bring for customers incomparable cost efficiency advantages.
The key advantages of GSV series plastic injection machine:
- Save of energy
- High speed system response and short molding cycle
- Largely decrease system oil temperature
- Reduce mold open and close crash to extend service time of machine and mold tool.
- To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.
- Higher requirement for hydraulic oil; provides with imported high quality oil strainer.
| GS478 | A | B | C | D | |
| Screw Diameter | mm | 70 | 80 | 85 | 90 |
| Screw L/D Ratio | L/D | 22.9 | 20 | 18.8 | 17.8 |
| Injection Pressure | Mpa | 194 | 149 | 132 | 117 |
| Shot Size(Theoretical) | cm3 | 1693.3 | 2211.7 | 2496.8 | 2799.2 |
| Injection Weight | g | 1541 | 2013 | 2272 | 2547 |
| Injection Rate | g/s | 345 | 437.5 | 493.9 | 553.7 |
| Plasticizing Capacity | g/s | 73.1 | 95.5 | 107.9 | 120.9 |
| Screw Speed | rpm | 0-160 | |||
| Injection Stroke | mm | 440 | |||
| Clamp Tonnage | KN | 4780 | |||
| Toggle Stroke | mm | 780 | |||
| Space Between Tie Bars | mm | 820*800 | |||
| Max.Mould Height | mm | 780 | |||
| Min.Mould Height | mm | 320 | |||
| Daylight Opening | mm | 1560 | |||
| Ejector Tonnage | KN | 110 | |||
| Ejector Stroke | mm | 200 | |||
| Ejector Number | piece | 17 | |||
| System Pressure | Mpa | 16 | |||
| Pump motor Power | KW | 45 | |||
| Heater Power | KW | 30.95 | |||
| Hopper Capacity | Kg | 50 | |||
| Machine Dimension(L*W*H) | m | 7.92*2.14*2.35 | |||
| Oil Tank Capacity | L | 590 | |||
| Machine Weight | t | 19 | |||
Send Inquiry to This Supplier
You May Also Like
-
50T Plastic Injection Molding Machine SupplierUS$ 11,800 - 11,800MOQ: 1 Set
-
FHP Drive,Power Transmission PartsNegotiableMOQ: 1
-
Hydraulic CutterUS$ 1 - 10,000MOQ: 1 Piece
-
China Supplier Plastic Injection Molding MachineUS$ 8,999 - 19,999MOQ: 1 Set
-
2 Line Combing Drawing Sisal MachineUS$ 1 - 9MOQ: 1 Unit
-
Transmission Large Gear Customized in ChinaUS$ 1,500 - 6,000MOQ: 1 Metric Ton
-
Automatic Spraying Paint MachineUS$ 54,000 - 76,300MOQ: 1 Set
-
Mixing Machine of Wood Pallet MakingUS$ 6,000 - 13,800MOQ: 1 Set
-
Wrapping MachineryNegotiableMOQ: 1 Set
-
PET Strapping MachineUS$ 520 - 1,190MOQ: 1 Set
